変更履歴

ath10k: fix compilation error with CONFIG_OF not available

of_platform_device_create require CONFIG_OF selected.
Add an ifdef and register to the of platform only if of is available.

Fixes: 985954ccbd11 ("kernel: add ath10k support for of_get_mac_address")
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
 (commit: 853e846)

x86: include kmod-fs-vfat by default in generic images

As x86/64 and x86/generic may be using UEFI, mounting the FAT-32 /boot
is necessary in order not to loose configuration files accross
sysupgrades. Include kmod-fs-vfat by default to make sure /boot can
always be mounted.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
 (commit: aaf1028)

kernel: bump 5.10 to 5.10.51

No deleted or manually refreshed patches.

Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
 (commit: a395cd0)

mediatek: mt7623: build with Linux 5.10

Update Kernel config and set Linux 5.10 for mediatek/mt7623.
(patches have already been updated to 5.10 when mt7622 was bumped)
Tested on Bananapi BPi-R2.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
 (commit: bce7777)

mediatek: mt7623: import patch to fix flow offloading

Hardware flow offloading was reported to work when setting the right
version identifier. Import a patch from Frank Wunderlich doing that.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
 (commit: 932366f)

kernel: make uImage.FIT partition parser work on MBR partitions

Introduce new partition type 0x2e representing uImage.FIT and trigger
FIT partition parser on partitions having that type.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
 (commit: 8d633bf)

uboot-mediatek: rework support for the BPi-R2

 * use built-in default environment instead of file in bootfs
 * get rid of bootfs alltogether and use uImage.FIT
 * auto-detect boot device like original script did
 * add support for factory button

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
 (commit: ec3bd5e)

uboot-envtools: move mediatek to mediatek_mt7622

All mediatek boards having fw_env accessible through uboot-envtools
belong to be mt7622 subtarget. Move the file, as subtarget-specific
files are supported for a while now.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
 (commit: a71fa5e)

uboot-envtools: add configuration for Bananapi BPi-R2

Add fw_env configuration for the BPi-R2 which is a mediatek/mt7623
devboard which can be booted from SD Card or eMMC.
Auto detect the boot device and add environment accordingly.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
 (commit: 6b2000b)

mediatek: rework Bananapi BPi-R2

 * introduce recovery (=initramfs) vs. production dual boot scheme
 * make use of uImage.FIT (instead of FAT partition)
 * generate images using build steps (instead of external scripts)
 * simplify sysupgrade and config restore (thanks to uImage.FIT)
 * make sure mmc devices are ordered persistently (set DT aliases)

This commit breaks sysupgrade from existing installations, you will
have to re-install using the sdcard.img.gz image.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
 (commit: 86a61e7)

uboot-mediatek: fix board name of Bananapi BPi-R2

As the board name was changed to be identical to the device tree
compatible string (just like for other boards), also reflect that
change for U-Boot.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
 (commit: 025c0bc)

mediatek: drop kmod-mmc

Support for MMC is built-into the kernel anyway, no need to select the
(empty/stub) kmod package.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
 (commit: ddec752)

mediatek: fix typo in kernel mt7623/config-5.10

Fix typo reported by github user @mans0n.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
 (commit: 27deb35)

linux/rockchip: update the USB 3.0 controller node patch

This has been added in Linux 5.10.51 [1], but it's broken/incomplete. Update our
patch and refresh the remaining patches.

[1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.51&id=421aff50af5e4cdc56b3ac8d6b670e09697bc8ac

Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
 (commit: f7ab41a)

mediatek: remove ext4 images from mt7623 build

A full read-write rootfs cannot work inside uImage.FIT as the hash
will obviously change once writing to it. Disable generating ext4
rootfs images.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
 (commit: fe75961)

mediatek: mt7623: add back needed build steps for U7623 board

When reworking the BPi-R2 the mtk-mmc-img build step was removed
despite it was still needed to build the image for the UniElec U7623
board. Add it back for now until U7623 gets its facelift.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
 (commit: c5b3c13)

bmips: fix missing NVMEM subsystem

MAC address retrieval was switched to more generic upstream (5.13) NVMEM
based solution in commit 32adbfc789f6 ("bmips: convert mtd-mac-address
to nvmem implementation"), but NVMEM subsystem wasn't enabled in the
kernel, so fix it now.

References: https://github.com/openwrt/openwrt/pull/4041#issuecomment-883322801
Fixes: 32adbfc789f6 ("bmips: convert mtd-mac-address to nvmem implementation")
Signed-off-by: Petr Štetiar <ynezz@true.cz>
 (commit: f33fbfa)

ramips: fix missing NVMEM subsystem

MAC address retrieval was switched to more generic upstream (5.13) NVMEM
based solution in commit 06bb4a5018cd ("ramips: convert mtd-mac-address
to nvmem implementation") , but NVMEM subsystem wasn't enabled in the
kernel, so fix it now.

References: https://github.com/openwrt/openwrt/pull/4041#issuecomment-883322801
Fixes: 06bb4a5018cd ("ramips: convert mtd-mac-address to nvmem implementation")
Signed-off-by: David Bauer <mail@david-bauer.net>
Signed-off-by: Petr Štetiar <ynezz@true.cz> [commit message]
 (commit: 373c08b)

mediatek: mt7623: allow build without ext4 rootfs

The image generation code for the U7623 board expects ext4 filesystem
to be selected in menuconfig and CONFIG_TARGET_ROOTFS_PARTSIZE to be
defined. Now that ext4 isn't enabled any more, the variable was missing
and broke the build.
Set the default (104) instead of using the config variable to fix that.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
 (commit: 5096f05)

mediatek: mt7623: yet another legacy image variable restored

Restore BOOTFS_BLOCKS variable until U7623 gets brushed, so things
hopefully build now.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
 (commit: 089c2bb)

generic: add mac-address property for NVMEM mac addresses

Traversing the device-tree by referencing a network device to determine
a devices labe-mac does not work with the generic nvmem implementation,
as the userspace expects the MAC-address to be available as a
device-tree property.

The legacy mtd-mac-address implementation did create such a node. Do the
same when using the nvmem implementation to allow reading the MAC
address.

Fixes commit d284e6ef0f06 ("treewide: convert mtd-mac-address-increment*
to generic implementation")

Signed-off-by: David Bauer <mail@david-bauer.net>
 (commit: b309248)

ath79: kernel: Add missing quote to drivers/mfd/Kconfig

A missing quote in target/linux/ath79/patches-5.x/920-mikrotik-rb4xx.patch
produces:

...
scripts/kconfig/conf  --syncconfig Kconfig
drivers/mfd/Kconfig:2016:warning: multi-line strings not supported
...

This patch adds missing closing quote, fixing the above warning.

Signed-off-by: Paul Blazejowski <paulb@blazebox.homeip.net>
 (commit: f7374bc)

ramips: mt7621: remove bring up DSA master init script

With commit 2e17c710954b, there is no need to bring up DSA master port
manually.

Signed-off-by: DENG Qingfang <dqfext@gmail.com>
 (commit: 6dc1864)

kernel: add missing symbol to kmod-qlcnic

When the kmod-qlcnic package is built on targets that have
CONFIG_PCI_IOV enabled, the CONFIG_QLCNIC_SRIOV symbol is exposed.
Enable this symbol in the kmod package to fix its build.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
 (commit: 3cb22b2)

generic: fix mediatek and dsa not detecting mac-addr from nvmem

Nvmem require the device node to be registered with the of_platform.
Register the device node so that nvmem can correctly find the dev and
correctly load the mac-addr stored in the nvmem cell declared in the dts.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
 (commit: 6bc6a41)

fstools: update to git HEAD

59f7c11 blockd: create mountpoint parent folder if needed
9cc96af Revert "block: resolve /dev/mapper/* name for /dev/dm-0 when hotplugging"
06334ac Revert "blockd: detect mountpoint of /dev/mapper/*"
9ab3551 block: use /dev/dm-* instead of /dev/mapper/*
5114595 block: allow remove hotplug event to arrive at blockd

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
 (commit: 5bc898b)

fstools: update to git HEAD (again)

 a846c6b blockd: fix length of timeout int passed to ioctl
 1d681ca block: support umount device basename

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
 (commit: ca31755)

mediatek: mt7623: import patch to fix spi

The patch fixes the fifo rx mode for the mt7623. It is already accepted
upstream for Linux Kernel 5.15.

To test the spi we can change the dts file to

&spi0 {
	pinctrl-names = "default";
	pinctrl-0 = <&spi0_pins_a>;
	status = "okay";
	spidev: spidev@0 {
		compatible = "linux,spidev";
		spi-max-frequency = <1000000>;
		reg = <0>;
	};
};

Afterwards we should see a spidev device under /dev/.
To test it we can further use spidev-test.

Signed-off-by: Nick Hainke <vincent@systemli.org>
 (commit: 90db922)

procd: update to git HEAD

 772292e uxc: don't restart containers when mount shows up
 3a9d910 uxc: resolve volume UUIDs by name of UCI fstab section

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
 (commit: 1ed9fc6)

netifd: update to the latest version

85f01c44a950 bridge: check bridge port vlan membership on link-up events
17e453bd68b4 wireless: add back regular virtual interfaces on hotplug-add events as well

Signed-off-by: Felix Fietkau <nbd@nbd.name>
 (commit: 2801fe6)

kernel/generic: fix the arm gc-sections patch

Latest binutils (2.37) exposed a long-standing bug. The kernel linking stage
would break at the SORTTAB step, due to the exception table having been
previously purged from vmlinux, as its section wasn't marked as unconditionally
kept. Fix thusly.

Additionally, the "#define ARM_MMU_DISCARD(x) KEEP(x)" change is bogus. It
would only apply to !CONFIG_MMU devices (which we don't support in OpenWrt), and
it would even break the build if referenced. Drop it.

While at it, rename the patch in order to make it obvious that it's
arm-specific.

Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
[Add same changes for kernel 5.4 too]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
 (commit: 023a136)

kernel: backport workaround for Realtek RTL8672 and RTL9601C chips

Adds support for GPON SFP modules based on the Realtek RTL8672 and
RTL9601C chips, including but not limited to:
* V-SOL V2801F
* C-Data FD511GX-RM0
* OPTON GP801R
* BAUDCOM BD-1234-SFM
* CPGOS03-0490 v2.0
* Ubiquiti U-Fiber Instant
* EXOT EGS1

Signed-off-by: Vladimir Markovets <abam_a@yahoo.com>
 (commit: f032601)

kernel: Add support for XTX XT26G02A SPI NAND

This chip is used on Teltonika RUTX boards.

Signed-off-by: Felix Matouschek <felix@matouschek.org>
 (commit: 92012dd)

kernel: bump 5.10 to 5.10.52

Add the new CONFIG_BATTERY_RT5033 to the generic configuration, as reported by
Paul Blazejowski. Resort the kconfig while at it.

No deleted or manually refreshed patches.

Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
 (commit: 2b2ac84)

kernel: bump 5.4 to 5.4.133

Manually rebased:
  pending-5.4/690-net-add-support-for-threaded-NAPI-polling.patch

All other patches automatically rebased.

Build system: x86_64
Build-tested: ipq806x/R7800
Run-tested: ipq806x/R7800

No dmesg regressions, everything functional

Signed-off-by: John Audia <graysky@archlinux.us>
 (commit: 5408e81)

kernel: bump 5.4 to 5.4.134

All patches automatically rebased.

Build system: x86_64
Build-tested: ipq806x/R7800
Run-tested: ipq806x/R7800

Signed-off-by: John Audia <graysky@archlinux.us>
 (commit: d15db2f)

kernel/generic: add a missing symbol to the 5.10 kconfig

Add CONFIG_HAVE_ARM_ARCH_TIMER (disabled). A make kernel_oldconfig on cortexa9
will otherwise prompt for its selection. The 5.4 configuration already contains
the same symbol.

Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
 (commit: 2f1bd91)

kernel/generic: sort the 5.10 kconfig symbols

Sort the kernel configuration using scripts/kconfig.pl.

Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
 (commit: fb6b824)

toolchain/binutils: add binutils 2.37

Tested on ath79/generic, without issues.

Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
 (commit: d63fbfc)

elfutils: fix building with GCC 11

Add a patch to fix building with GCC 11, which triggers new warnings by
enabling -Warray-parameter by default.

Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
 (commit: 2434a57)

linux-firmware: add 2G and 5G precal binaries for QCA99X0

Some devices (such as Extreme Networks WS-AP3959i-ROW) do not contain
precal binaries in ART, and the precal in the cards eeprom causes
firmware load errors.

These firmware files were previously in linux-firmware,
so these are adding them back and renaming to be cleaner.

Signed-off-by: Damien Mascord <tusker@tusker.org>
 (commit: d996b47)

realtek: remove rtl83xx vlan 1 special cases

On reset, the PVID of all ports is set to 1; if this is reset to 0,
the special cases for VLAN 1 are no longer required.

port_vlan_add is called with vid=0 when the DSA port interfaces are
enabled with no VLAN; previously the VLAN was not configured in this
case, relying on VLAN 1 being present, but with the PVID set to 0,
configuring VLAN 0 as normal works as expected.

Signed-off-by: Thomas Nixon <tom@tomn.co.uk>
 (commit: ad712c7)

Revert "realtek: Fix failsafe mode"

This reverts commit b7ee0786b56d1088c195fe7c1cdb1ad7d20c9245.

With the previous commit "realtek: remove rtl83xx vlan 1 special cases"
this is no longer required.

Signed-off-by: Thomas Nixon <tom@tomn.co.uk>
 (commit: cdb5aca)

layerscape: fix config restore for FRWY-LS1046A

commit 2c2d77bd3bd4 ("layerscape: add FRWY-LS1046A board support")
missed to add an entry to the 79_move_config preinit script.

Therefore, the config transfer on sysupgrade wass broken for this device.

Signed-off-by: Martin Schiller <ms@dev.tdt.de>
 (commit: 3f97a04)

layerscape: armv8_64b: enable Microsemi phy driver for FRWY-LS1046A

Enable the Microsemi phy driver to support the VSC8514 QSGMII phy on the
FRWY-LS1046A board.

Otherwise, the "Generic PHY" driver is used.

Signed-off-by: Martin Schiller <ms@dev.tdt.de>
 (commit: bbfb142)

mvebu: limit mvneta tx queue workaround to 32 bit SoC

This patch has been carried since introduction throughout every kernel
major bump and no one has tested if the later kernels improved the
situation. The Armada 3720 SoC can only process GbE interrupts on Core 0
and this is already limited in all stable kernels, so ditch this
workaround for 64 bit SoCs.

Ref: https://git.kernel.org/torvalds/c/cf9bf871280d

Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
 (commit: cbdd2b6)

uboot-envtools: mvebu: update uci defaults for Turris Omnia

From version 2021.09 U-Boot will fixup Turris Omnia's DTB before
booting, separating U-Boot's environment into separate MTD partition
"u-boot-env" [1].

Check if "u-boot-env" MTD partition exists and set the uci defaults
accordingly.

[1] https://lists.denx.de/pipermail/u-boot/2021-July/455017.html

Signed-off-by: Marek Behún <marek.behun@nic.cz>
 (commit: 713be75)

uboot-mvebu: update to v2021.07

Refresh the patches.
Switch to AUTORELEASE while at it.

Signed-off-by: Andre Heider <a.heider@gmail.com>
 (commit: 0208b3b)

arm-trusted-firmware-mvebu: remove unpacked sources upon clean

These are all unpacked in the Build/Prepare step, clean up accordingly.

Signed-off-by: Andre Heider <a.heider@gmail.com>
 (commit: 0c111ce)

arm-trusted-firmware-mvebu: update to v2.5

Revert to using the checked in `tbb_linux` image tool binary since building
it drags in the rather big Crypto++ project.

Cherry-pick the post-release UART fixes.

Switch to AUTORELEASE while at it.

Signed-off-by: Andre Heider <a.heider@gmail.com>
 (commit: b40705b)

arm-trusted-firmware-mvebu: update a3700-tools to current master

2efdb10 wtmi: Fix calculation of UART divider
4247e39 fix: twin die ddr porting guide
8ad7992 sys_init: Add missing newlines in debug mode
4ddea19 avs: Validate VDD value from OTP
c444aeb avs: Fix description for avs value 0x2e
1915b78 tim: Optimize code generated by gettimver.sh and print newline
21f566d tim: Print mv_ddr version and configuration on UART
840b70b tim: Use variable $DDRFILE where possible
c10e6ae tim: Fix waiting for UART TX ready
7bf95cf wtmi: Wait 3ms for the TX on UART to be empty prior resetting TX FIFO
63e8433 wtmi: Add "dirty" suffix to git commit and rebuild sys_init.bin binary when VERSION changes
e949b58 wtmi: During setup clock phase print CPU and DDR speed
10376b5 wtmi: Flush output on UART after the '\n' character
509c647 Makefile: Check that specified DDR_TOPOLOGY option is valid

Signed-off-by: Andre Heider <a.heider@gmail.com>
 (commit: 6618e33)

arm-trusted-firmware-mvebu: update mv-ddr-marvell to current master

02e23db fix compilation errors popped up by GCC-10
7c35173 Merge pull request #29 from pali/sync-a38x-uboot
bb734f5 mv_ddr: a38x: Use SOC_REGS_PHY_BASE for INTER_REGS_BASE
ee1ea84 mv_ddr: a38x: Fix ddr3 compilation
70f3e2e mv_ddr: Fix comment typo
dd960b4 mv_ddr: ddr3: Allow boards to specify CK_DELAY parameter
a87f4f7 mv_ddr: ddr3: only use active chip-selects when tuning ODT
3defcec mv_ddr: a38x: Add support for setting timing in hws_topology_map

Signed-off-by: Andre Heider <a.heider@gmail.com>
 (commit: c552bbe)

arm-trusted-firmware-mvebu: update CM3 toolchain to v10.2

Linaro stopped shipping binary toolchains quite some time ago, switch over to
the ARM builds.

Signed-off-by: Andre Heider <a.heider@gmail.com>
 (commit: ac42765)

arm-trusted-firmware-mvebu: switch to CZ.NIC's Secure Firmware

CZ.NIC as part of Turris project released free and open source WTMI
application firmware wtmi_app.bin for all Armada 3720 devices.

This firmware includes additional features like access to Hardware
Random Number Generator of Armada 3720 SoC which original Marvell's
fuse.bin image does not have.

Add a patch which allows to pass the commit id, so the firmware is able
to identify itself, see a04bffeb.
Add a patch to disable linking with gold, since the ARM toolchain
doesn't ship gold.
Cherry-pick the 3 post-release fixes.

Signed-off-by: Andre Heider <a.heider@gmail.com>
 (commit: 896d49d)

procd: update to git HEAD

 f26233e watchdog: Add an info message if the watchdog reset the system

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
 (commit: e11be05)

mediatek: Fix Fidelix-FM35X1GA patch

This patch did not apply cleanly any more after support for the XTX
flash was added to the generic patches.

Fixes: 92012dd8677a ("kernel: Add support for XTX XT26G02A SPI NAND")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
 (commit: 8c2509d)

netifd: update to the latest version

440eb0647708 bridge: fix regression in bringing up bridge ports

Signed-off-by: Felix Fietkau <nbd@nbd.name>
 (commit: 39f81b0)

hostapd: make the snooping interface (for proxyarp) configurable

Use the VLAN interface instead of the bridge, to ensure that hostapd receives
untagged DHCP packets

Signed-off-by: Felix Fietkau <nbd@nbd.name>
 (commit: 7b46377)

hostapd: fix a segfault on sta disconnect with proxy arp enabled

Signed-off-by: Felix Fietkau <nbd@nbd.name>
 (commit: 5dd1bd5)

hostapd: make proxyarp work with libnl-tiny

Remove a dependency on libnl3-route

Signed-off-by: Felix Fietkau <nbd@nbd.name>
 (commit: ae1c5d0)

hostapd: add missing chunk for the snoop interface fix

Fixes: 7b46377a0cd9 ("hostapd: make the snooping interface (for proxyarp) configurable")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
 (commit: f1b98fa)

ath79: add support for Joy-IT JT-OR750i

Specifications:
 * QCA9531, 16 MiB flash (Winbond W25Q128JVSQ), 128 MiB RAM
 * 802.11n 2T2R (external antennas)
 * QCA9887, 802.11ac 1T1R (connected with diplexer to one of the antennas)
 * 3x 10/100 LAN, 1x 10/100 WAN
 * UART header with pinout printed on PCB

Installation:
 * The device comes with a bootloader installed only
 * The bootloader offers DHCP and is reachable at http://10.123.123.1
 * Accept the agreement and flash sysupgrade.bin
 * Use Firefox if flashing does not work

TFTP recovery with static IP:
 * Rename sysupgrade.bin to jt-or750i_firmware.bin
 * Offer it via TFTP server at 192.168.0.66
 * Keep the reset button pressed for 4 seconds after connecting power

TFTP recovery with dynamic IP:
 * Rename sysupgrade.bin to jt-or750i_firmware.bin
 * Offer it via TFTP server with a DHCP server running at the same address
 * Keep the reset button pressed for 6 seconds after connecting power

Co-authored-by: Sebastian Schaper <openwrt@sebastianschaper.net>
Signed-off-by: Vincent Wiemann <vincent.wiemann@ironai.com>
 (commit: 55b4b36)

Revert "generic: add mac-address property for NVMEM mac addresses"

This reverts commit b30924873062be47250e6b872347461c8221688d.

This commit could create a property without allocated memory, breaking
subsequent reads over a nodes property. Also, the mac-address-increment
was not applied when reading from nvmem.

Revert this commit for now, which breaks the label-mac-address logic.
Possibly, traversing the device-tree from the netdev side is easier
anyways.

Signed-off-by: David Bauer <mail@david-bauer.net>
 (commit: bd521f2)

ath79: enable missing pinmux for JT-OR750i

Without explicit configuration of these pins the ethernet as well as
status LED of the device do not work correctly.

Signed-off-by: David Bauer <mail@david-bauer.net>
 (commit: 4feb9a4)

ath79: fix JT-OR750i switch LED assignment

The LEDs for LAN1 and LAN3 were swapped. Link on port 1 would illuminate
the LED on port 3 and vice versa.

Signed-off-by: David Bauer <mail@david-bauer.net>
 (commit: f0a885e)

fstools: update to git HEAD

 46d02c2 block: don't add non-ubifs ubi devices
 cc63933 blockd: send mount.ready when startup has completed

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
 (commit: 57ece63)

generic: write back netdev MAC-address to device-tree

The label-mac logic relies on the mac-address property of a netdev
devices of-node. However, the mac address can also be stored as a
different property or read from e.g. an mtd device.

Create this node when reading a mac-address from OF if it does not
already exist and copy the mac-address used for the device to this
property. This way, the MAC address can be accessed using procfs.

Signed-off-by: David Bauer <mail@david-bauer.net>
 (commit: cd39aba)

generic: fix compile-error for non-mtd platforms

Fixes commit cd39aba402ea ("generic: write back netdev MAC-address to device-tree")

Signed-off-by: David Bauer <mail@david-bauer.net>
 (commit: 9928236)

kernel: fix bgmac compilation in kernel 5.10

It's required since upstream kernel commit 4bdc0d676a64 ("remove
ioremap_nocache and devm_ioremap_nocache").

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
 (commit: 5be1c02)

bcm53xx: add testing support for kernel 5.10

It still requires fixing PCIe support:
[    6.644699] pcie_iproc_bcma bcma0:7: host bridge /axi@18000000/pcie@12000 ranges:
[    6.652217] pcie_iproc_bcma bcma0:7:   No bus range found for /axi@18000000/pcie@12000, using [bus 00-ff]
[    6.661833] OF: /axi@18000000/pcie@12000: Missing device_type
[    6.667622] pcie_iproc_bcma: probe of bcma0:7 failed with error -12
[    6.673985] pcie_iproc_bcma bcma0:8: host bridge /axi@18000000/pcie@13000 ranges:
[    6.681514] pcie_iproc_bcma bcma0:8:   No bus range found for /axi@18000000/pcie@13000, using [bus 00-ff]
[    6.691137] pcie_iproc_bcma: probe of bcma0:8 failed with error -12
[    6.697522] pcie_iproc_bcma bcma0:9: host bridge /axi@18000000/pcie@14000 ranges:
[    6.705048] pcie_iproc_bcma bcma0:9:   No bus range found for /axi@18000000/pcie@14000, using [bus 00-ff]
[    6.714669] pcie_iproc_bcma: probe of bcma0:9 failed with error -12

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
 (commit: d8e8a2a)

bcm53xx: refresh kernel 5.10 config

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
 (commit: e88ab3b)

mediatek: mt7623: import patch to fix msi warning

The 1st generation MediaTek PCIe host bridge cannot handle Message
Signaled Interrupts (MSIs). The core PCI code is not aware that MSI is
not available. This results in warnings of the form:

WARNING: CPU: 2 PID: 112 at include/linux/msi.h:219
  pci_msi_setup_msi_irqs.constprop.8+0x64/0x6c
Modules linked in: ahci(+) libahci libata sd_mod scsi_mod
  gpio_button_hotplug
CPU: 2 PID: 112 Comm: kmodloader Not tainted 5.10.52 #0
Hardware name: Mediatek Cortex-A7 (Device Tree)

Import patches that introduce the 'no_msi' attribute to signal missing
MSI support to the core PCI.

Refresh patches:
- 000-spi-fix-fifo.patch
- 330-mtk-bmt-support.patch
- 510-net-mediatek-add-flow-offload-for-mt7623.patch
- 601-PCI-mediatek-Use-regmap-to-get-shared-pcie-cfg-base.patch
- 610-pcie-mediatek-fix-clearing-interrupt-status.patch
- 700-net-ethernet-mtk_eth_soc-add-support-for-coherent-DM.patch
- 710-pci-pcie-mediatek-add-support-for-coherent-DMA.patch

Signed-off-by: Nick Hainke <vincent@systemli.org>
 (commit: e8e2b88)

generic: fix build warning

Fixes a unused variable warning:

drivers/of/of_net.c: In function 'of_get_mac_address_mtd':
drivers/of/of_net.c:92:19: warning: unused variable 'prop' [-Wunused-variable]

Signed-off-by: David Bauer <mail@david-bauer.net>
 (commit: a57d7c2)

kernel: bump 5.10 to 5.10.53

No deleted or manually refreshed patches.

Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
 (commit: f2961c9)

kernel: bump 5.10 to 5.10.54

Deleted (upstreamed) patches:
mediatek/patches-5.10/000-spi-fix-fifo.patch

Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
 (commit: a20e614)

fstools: update to git HEAD

 b7bf185 blockd: make most calls to 'block' asynchronous

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
 (commit: 3404af7)

otrx: use firmware-utils.git to avoid code duplication

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
 (commit: 7c4d79a)

generic: add missing Kconfig symbol

Fixes build errors for sunxi as well as rockchip targets.

Signed-off-by: David Bauer <mail@david-bauer.net>
 (commit: f038a16)

kernel: bump 5.4 to 5.4.135

All patches automatically rebased.

Build system: x86_64
Build-tested: ipq806x/R7800
Run-tested: ipq806x/R7800

No dmesg regressions, everything functional

Signed-off-by: John Audia <graysky@archlinux.us>
 (commit: 28ef764)

kernel: bump 5.4 to 5.4.136

All patches automatically rebased.

Build system: x86_64
Build-tested: ipq806x/R7800
Run-tested: ipq806x/R7800

No dmesg regressions, everything functional

Signed-off-by: John Audia <graysky@archlinux.us>
 (commit: bd3cb93)

kernel: bump 5.4 to 5.4.137

Automatically rebased.

Build system: x86_64
Build-tested: ipq806x/R7800
Run-tested: ipq806x/R7800

No dmesg regressions, everything functional

Signed-off-by: John Audia <graysky@archlinux.us>
 (commit: 9993e3e)

odhcp6c: update to latest git HEAD

94adc8b odhcp6c: use strpbrk to provide get_sep_pos
e0d9a4b cmake: enable extra compiler checks

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
 (commit: e02a4c2)

generic: add missing ARM64 crypto Kconfig symbols

bcm27xx-bcm2710 builds are stalling when compiled with V=s.

Explitily disable these unset symbols to avoid stalling
builds.

Signed-off-by: David Bauer <mail@david-bauer.net>
 (commit: 191c4ff)

dnsmasq: rework jail mounts

 * split into multiple lines to improve readability
 * use EXTRA_MOUNT for addnhosts instead of blindly adding /tmp/hosts
 * remove no longer needed mount for /sbin/hotplug-call
 * add dhcp-script.sh dependencies (jshn, ubus)

Fixes: 3a94c2ca5c ("dnsmasq: add /tmp/hosts/ to jail_mount")
Fixes: aed95c4cb8 ("dnsmasq: switch to ubus-based hotplug call")
Reported-by: Stijn Tintel <stijn@linux-ipv6.be>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
 (commit: 59c6322)

ramips: add support for I-O DATA WN-DEAX1800GR
 (commit: 7e2478e)

ramips: add chosen node with console setting for WN-DEAX1800GR
 (commit: 1b108f1)

ramips: re-configure and enable LEDs/Keys for WN-DEAX1800GR
 (commit: 2d1f549)

ramips: adjust pcie0/1 nodes for WN-DEAX1800GR

pcie0: 14c3,7916 (5GHz?)
pcie1: 14c3,7915 (2.4GHz?)
 (commit: 46e6f45)

ramips: disable pcie1 node for WN-DEAX1800GR
 (commit: 064b67a)

ramips: cleanup pcie related nodes for WN-DEAX1800GR

2x PCIe lines are used for MT7915D, for enough band-width.
 (commit: 5ba1a70)

ramips: add default-state to power LED for WN-DEAX1800GR
 (commit: 0432cb2)

ramips: convert to "nvmem-cells" impl. from mtd-mac-address for WN-DEAX1800GR
 (commit: 8dc9778)

ramips: configure ports with wan,lan1,lan2 for WN-DEAX1800GR
 (commit: 404614e)

ramips: add missing RO flag to factory partition for WN-DEAX1800GR
 (commit: be42dd6)

ramips: drop RO flag from u-boot-env for WN-DEAX1800GR (tmp)
 (commit: fdf3a2e)