変更履歴

CI: labeler: add bcm27xx-utils

bcm27xx-utils can only be built for bcm27xx target.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
 (commit: 67b0cd8)

ramips: m4r v4: fix typo

It should be debounce-interval, as with the others.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16802
Signed-off-by: Robert Marko <robimarko@gmail.com>
 (commit: 9c6cd22)

bcm27xx-gpu-fw: update to latest version

Use release tar instead of downloading separate files.

Full changelog: https://github.com/raspberrypi/firmware/compare/1.20240424...1.20241008

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
 (commit: 7afdbc0)

bcm27xx: update to latest RPi patches

The patches were generated from the RPi repo with the following command:
git format-patch v6.6.58..rpi-6.6.y

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
 (commit: 538a1d7)

ath79: Really fix 5GHz on QCA9886 variant of ZTE MF286

Fix in commit 25eead21c5ab ("ath79: fix 5GHz on QCA9886 variant of ZTE MF286")
was incomplete. A user of such variant popped up, and in the boot log
after installation, we discovered that QCA9886 expects different
pre-calibration data size, than the older QCA9880 variant:

ath10k_pci 0000:00:00.0: qca9888 hw2.0 target 0x01000000 chip_id 0x00000000 sub 0000:0000
ath10k_pci 0000:00:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0
ath10k_pci 0000:00:00.0: firmware ver 10.4b-ct-9888-fW-13-5ae337bb1 api 5 features mfp,peer-flow-ctrl,txstatus-noack,wmi-10.x-CT,ratemask-CT,regdump-CT,txrate-CT,flush-all-CT,pingpong-CT,ch-regs-CT,nop-CT,set-special-CT,tx-rc-CT,cust-stats-CT,txrate2-CT,beacon-cb-CT,wmi-block-ack-CT,wmi-bcn-rc-CT crc32 59e741e7
ath10k_pci 0000:00:00.0: invalid calibration data length in nvmem-cell 'pre-calibration': 2116 != 12064
ath10k_pci 0000:00:00.0: Loading BDF type 0
ath10k_pci 0000:00:00.0: failed to fetch board data for bus=pci,vendor=168c,device=0056,subsystem-vendor=0000,subsystem-device=0000 from ath10k/QCA9888/hw2.0/board-2.bin
ath10k_pci 0000:00:00.0: failed to fetch board-2.bin or board.bin from ath10k/QCA9888/hw2.0
ath10k_pci 0000:00:00.0: failed to fetch board file: -12
ath10k_pci 0000:00:00.0: could not probe fw (-12)

Explicitly define a pre-calibration nvmem-cell for this variant, and use
it instead of the calibration one, which is shorter.

Fixes: 25eead21c5ab ("ath79: fix 5GHz on QCA9886 variant of ZTE MF286")
Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16809
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
 (commit: fc236f3)

mediatek: mt7988: fix peripheral SPI busses

The clocks for SPI busses were named wrongly which resulted in the
spi-mt65xx driver not requesting them. This has apparently been
worked around by marking the clocks required for SPI0 which is used
for SPI-NOR and SPI-NAND flash chips as critical.
Fix the device tree for all 3 generic SPI host controllers and no
longer mark clocks as critical.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
 (commit: 2b173ab)

openwrt-keyring: add OpenWrt 24.10 release build usign key

 fbae29d730f8 usign: add OpenWrt 24.10 release build public key

Signed-off-by: Petr Štetiar <ynezz@true.cz>
 (commit: a535cfc)

uboot-mediatek: add support for arcadyan,mozart

Signed-off-by: John Crispin <john@phrozen.org>
 (commit: 88fa1f7)

mediatek: add support for Realtek RTL8261n 10G PHYs

There is no upstream driver yet. Merge the RTL SDK driver for now.

Signed-off-by: John Crispin <john@phrozen.org>
 (commit: cfe8e6e)

mediatek: add support for swapping the polarity on usxgmii interfaces

This patch comes from the MTK SDK.

Signed-off-by: John Crispin <john@phrozen.org>
 (commit: ddfae94)

mediatek: filogic: add Arcadyan Mozart platform

* Mediatek MT7988A (4x Cortex-A73, up to 1.8 GHz clock speed)
* 8 GiB eMMC
* 4 GiB DDR4 RAM
* 2x 10000M + 1x 1000M  ports
* MT7996 Tri-band (2.4G, 5G, 6G) 4T4R 802.11be Wi-Fi
* 2 buttons (Reset, WPS)
* 2x LED for each GMAC
* USB-C PD power input

Signed-off-by: John Crispin <john@phrozen.org>
 (commit: a85f11f)

kernel: KERNEL_NET_L3_MASTER_DEV default to y if !SMALL_FLASH

Follow-up for 45d541bb409355f090b971d96ebebd8610ef84a7

This change allows features such as kmod-vrf

```
KERNEL_NET_L3_MASTER_DEV=n

x86_64 generic
	bzImage 6,927,360 bytes
aarch64 coretex-a53
	kernel  4,268,836 bytes

KERNEL_NET_L3_MASTER_DEV=y

x86_64 generic
	bzImage 6,931,456 bytes
aarch64 coretex-a53
	kernel  4,273,042 bytes

Delta:
x86_64 generic
	+4096 bytes
aarch64 coretex-a53
	+4206 bytes

x86_64 generic vrf.ko - 258,792 bytes
aarch64 coretex-a53 vrf.ko - 263,632 bytes
```

See:
https://forum.openwrt.org/t/vrf-support-testing-out-evpn-at-home/181108
https://forum.openwrt.org/t/please-enable-net-l3-master-dev-in-kernel-build-by-default/201825

Signed-off-by: Paul Donald <newtwen+github@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16819
Signed-off-by: Robert Marko <robimarko@gmail.com>
 (commit: 2915cfb)

bcm27xx-gpu-fw: fix package

Install definition was accidentally removed in 7afdbc0955a5 and IB fails.

Fixes: 7afdbc0955a5 ("bcm27xx-gpu-fw: update to latest version")
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
 (commit: efd1ec5)

ipq40xx: use devm for mutex_init

Avoids having to call mutex_destroy in remove.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16755
Signed-off-by: Robert Marko <robimarko@gmail.com>
 (commit: 57f2c72)

uboot-mediatek: import patches improving menu navigation

Using the arrow keys to navigate the U-Boot menu often leads to being
dropped into the U-Boot shell unexpectedly.
This can be prevented in most cases by improving the logic to detect the
arrow key ESC sequence and only reprinting the menu if actually needed.
Also enable CONFIG_SERIAL_RX_BUFFER for all boards as it helps preventing
the remaining cases.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
 (commit: 5745b7e)

mediatek: pinctrl-mt7988: add missing PWM pingroups

Add additionals possible pinctrl group for pwm2~7 on pins
pin  4 (GPIO_A)        pwm7
pin 58 (JTAG_JTDI)     pwm2
pin 59 (JTAG_JTDO)     pwm3
pin 60 (JTAG_JTMS)     pwm4
pin 61 (JTAG_JTCLK)    pwm5
pin 62 (JTAG_JTRST_N)  pwm6

They can be useful e.g. on the BPi-R4 as in that way pwm2~6 can be exposed
on the 26-pin header (pwm6 always, pwm2~5 instead of the full UART).

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
 (commit: 2cbd230)

mediatek: filogic: BPi-R4: wire up pinctrl for pwm-fan

Assign pwm function of PWM0 pin to the pwm-fan.
This is mostly just cosmetics as it basically reflects the default
setting of that pin.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
 (commit: 591272d)

mediatek: refresh patches

The mediatek target requires refreshing after recent additions.

Fixes: cfe8e6e75f ("mediatek: add support for Realtek RTL8261n 10G PHYs")
Fixes: ddfae94a14 ("mediatek: add support for swapping the polarity on usxgmii interfaces")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
 (commit: 675d7c8)

kernel: can: package driver for Geschwister Schneider interface

Package gs_usb CAN driver, which is for Geschwister Schneider and
bytewerk.org candleLight compatible USB/CAN interfaces.

Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
 (commit: ef4df2b)

ramips: mt7621: convert usb power to regulators

These things are regulators. Should silence dmesg messages about using
dummy regulators.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16804
Signed-off-by: Robert Marko <robimarko@gmail.com>
 (commit: e612900)

ath79: gpio-latch-miktorik: use gpiochip_get_data

Oversight from devm conversion. No need for a custom static inline
function.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16747
Signed-off-by: Robert Marko <robimarko@gmail.com>
 (commit: 6d2ed48)

ath79: gpio-rb91x-key: use gpiochip_get_data

No need for a custom function that does the same thing.

Oversight from devm conversion.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16748
Signed-off-by: Robert Marko <robimarko@gmail.com>
 (commit: e99b583)

mediatek: YunCore AX835: fix voltage regulator

Specifying GPIO_ACTIVE_HIGH on the GPIO for the voltage regulator doesn't
suffice. The regulator itself requires enable-active-high to be set.

Fixes: #16292
Signed-off-by: Leon M. Busch-George <leon@georgemail.eu>
Link: https://github.com/openwrt/openwrt/pull/16839
Signed-off-by: Robert Marko <robimarko@gmail.com>
 (commit: d64e1ed)