Skip to content
成功

コンソール出力

スキップ 25,999KB .. すべてのログ
mipsel-openwrt-linux-musl-cpp -nostdinc -x assembler-with-cpp -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/arch/mips/boot/dts -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/arch/mips/boot/dts/include -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/include/ -undef -D__DTS__  -o /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt3052_jcg_jhr-n926r.dtb.tmp ../dts/rt3052_jcg_jhr-n926r.dts
/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/scripts/dtc/dtc -O dtb -i../dts/ -Wno-unit_address_vs_reg -Wno-simple_bus_reg -Wno-unit_address_format -Wno-pci_bridge -Wno-pci_device_bus_num -Wno-pci_device_reg -Wno-avoid_unnecessary_addr_size -Wno-alias_paths -Wno-graph_child_address -Wno-graph_port -Wno-unique_unit_address  -o /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt3052_iodata_wn-g300dgr.dtb /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt3052_iodata_wn-g300dgr.dtb.tmp
mipsel-openwrt-linux-musl-cpp -nostdinc -x assembler-with-cpp -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/arch/mips/boot/dts -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/arch/mips/boot/dts/include -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/include/ -undef -D__DTS__  -o /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt3052_mofinetwork_mofi3500-3gn.dtb.tmp ../dts/rt3052_mofinetwork_mofi3500-3gn.dts
../dts/rt5350.dtsi:119.4-28: Warning (gpios_property): /palmbus@10000000/gpio@600:ralink,num-gpios: cell 0 is not a phandle reference
../dts/rt5350.dtsi:119.4-28: Warning (gpios_property): /palmbus@10000000/gpio@600:ralink,num-gpios: Could not get phandle node for (cell 0)
../dts/rt5350.dtsi:136.4-27: Warning (gpios_property): /palmbus@10000000/gpio@660:ralink,num-gpios: cell 0 is not a phandle reference
../dts/rt5350.dtsi:125.19-142.5: Warning (gpios_property): /palmbus@10000000/gpio@660: Missing property '#gpio-cells' in node /pinctrl/spi_pins or bad phandle (referred from ralink,num-gpios[0])
rm -f /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt5350_intenso_memory2move.dtb.tmp
mipsel-openwrt-linux-musl-cpp -nostdinc -x assembler-with-cpp -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/arch/mips/boot/dts -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/arch/mips/boot/dts/include -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/include/ -undef -D__DTS__  -o /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt3050_netcore_nw718.dtb.tmp ../dts/rt3050_netcore_nw718.dts
../dts/rt3050.dtsi:112.4-28: Warning (gpios_property): /palmbus@10000000/gpio@600:ralink,num-gpios: cell 0 is not a phandle reference
../dts/rt3050.dtsi:112.4-28: Warning (gpios_property): /palmbus@10000000/gpio@600:ralink,num-gpios: Could not get phandle node for (cell 0)
../dts/rt3050.dtsi:132.4-28: Warning (gpios_property): /palmbus@10000000/gpio@638:ralink,num-gpios: cell 0 is not a phandle reference
../dts/rt3050.dtsi:132.4-28: Warning (gpios_property): /palmbus@10000000/gpio@638:ralink,num-gpios: Could not get phandle node for (cell 0)
../dts/rt3050.dtsi:148.4-28: Warning (gpios_property): /palmbus@10000000/gpio@660:ralink,num-gpios: cell 0 is not a phandle reference
../dts/rt3050.dtsi:140.19-154.5: Warning (gpios_property): /palmbus@10000000/gpio@660: Missing property '#gpio-cells' in node /flash@1f000000/partitions/partition@40000 or bad phandle (referred from ralink,num-gpios[0])
/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/scripts/dtc/dtc -O dtb -i../dts/ -Wno-unit_address_vs_reg -Wno-simple_bus_reg -Wno-unit_address_format -Wno-pci_bridge -Wno-pci_device_bus_num -Wno-pci_device_reg -Wno-avoid_unnecessary_addr_size -Wno-alias_paths -Wno-graph_child_address -Wno-graph_port -Wno-unique_unit_address  -o /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt3050_jcg_jhr-n805r.dtb /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt3050_jcg_jhr-n805r.dtb.tmp
mipsel-openwrt-linux-musl-cpp -nostdinc -x assembler-with-cpp -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/arch/mips/boot/dts -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/arch/mips/boot/dts/include -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/include/ -undef -D__DTS__  -o /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt3052_netgear_wnce2001.dtb.tmp ../dts/rt3052_netgear_wnce2001.dts
rm -f /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt3052_iodata_wn-g300dgr.dtb.tmp
mipsel-openwrt-linux-musl-cpp -nostdinc -x assembler-with-cpp -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/arch/mips/boot/dts -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/arch/mips/boot/dts/include -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/include/ -undef -D__DTS__  -o /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt3052_nexaira_bc2.dtb.tmp ../dts/rt3052_nexaira_bc2.dts
/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/scripts/dtc/dtc -O dtb -i../dts/ -Wno-unit_address_vs_reg -Wno-simple_bus_reg -Wno-unit_address_format -Wno-pci_bridge -Wno-pci_device_bus_num -Wno-pci_device_reg -Wno-avoid_unnecessary_addr_size -Wno-alias_paths -Wno-graph_child_address -Wno-graph_port -Wno-unique_unit_address  -o /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt3052_jcg_jhr-n926r.dtb /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt3052_jcg_jhr-n926r.dtb.tmp
../dts/rt3050.dtsi:112.4-28: Warning (gpios_property): /palmbus@10000000/gpio@600:ralink,num-gpios: cell 0 is not a phandle reference
../dts/rt3050.dtsi:112.4-28: Warning (gpios_property): /palmbus@10000000/gpio@600:ralink,num-gpios: Could not get phandle node for (cell 0)
../dts/rt3050.dtsi:132.4-28: Warning (gpios_property): /palmbus@10000000/gpio@638:ralink,num-gpios: cell 0 is not a phandle reference
../dts/rt3050.dtsi:132.4-28: Warning (gpios_property): /palmbus@10000000/gpio@638:ralink,num-gpios: Could not get phandle node for (cell 0)
../dts/rt3050.dtsi:148.4-28: Warning (gpios_property): /palmbus@10000000/gpio@660:ralink,num-gpios: cell 0 is not a phandle reference
../dts/rt3050.dtsi:140.19-154.5: Warning (gpios_property): /palmbus@10000000/gpio@660: Missing property '#gpio-cells' in node /palmbus@10000000/spi@b00/flash@0/partitions/partition@40000 or bad phandle (referred from ralink,num-gpios[0])
/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/scripts/dtc/dtc -O dtb -i../dts/ -Wno-unit_address_vs_reg -Wno-simple_bus_reg -Wno-unit_address_format -Wno-pci_bridge -Wno-pci_device_bus_num -Wno-pci_device_reg -Wno-avoid_unnecessary_addr_size -Wno-alias_paths -Wno-graph_child_address -Wno-graph_port -Wno-unique_unit_address  -o /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt3052_mofinetwork_mofi3500-3gn.dtb /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt3052_mofinetwork_mofi3500-3gn.dtb.tmp
rm -f /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt3050_jcg_jhr-n805r.dtb.tmp
/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/scripts/dtc/dtc -O dtb -i../dts/ -Wno-unit_address_vs_reg -Wno-simple_bus_reg -Wno-unit_address_format -Wno-pci_bridge -Wno-pci_device_bus_num -Wno-pci_device_reg -Wno-avoid_unnecessary_addr_size -Wno-alias_paths -Wno-graph_child_address -Wno-graph_port -Wno-unique_unit_address  -o /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt3052_jcg_jhr-n825r.dtb /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt3052_jcg_jhr-n825r.dtb.tmp
mipsel-openwrt-linux-musl-cpp -nostdinc -x assembler-with-cpp -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/arch/mips/boot/dts -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/arch/mips/boot/dts/include -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/include/ -undef -D__DTS__  -o /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt5350_nexx_wt1520-4m.dtb.tmp ../dts/rt5350_nexx_wt1520-4m.dts
../dts/rt3050.dtsi:112.4-28: Warning (gpios_property): /palmbus@10000000/gpio@600:ralink,num-gpios: cell 0 is not a phandle reference
../dts/rt3050.dtsi:112.4-28: Warning (gpios_property): /palmbus@10000000/gpio@600:ralink,num-gpios: Could not get phandle node for (cell 0)
../dts/rt3050.dtsi:132.4-28: Warning (gpios_property): /palmbus@10000000/gpio@638:ralink,num-gpios: cell 0 is not a phandle reference
../dts/rt3050.dtsi:132.4-28: Warning (gpios_property): /palmbus@10000000/gpio@638:ralink,num-gpios: Could not get phandle node for (cell 0)
../dts/rt3050.dtsi:148.4-28: Warning (gpios_property): /palmbus@10000000/gpio@660:ralink,num-gpios: cell 0 is not a phandle reference
../dts/rt3050.dtsi:140.19-154.5: Warning (gpios_property): /palmbus@10000000/gpio@660: Missing property '#gpio-cells' in node /flash@1f000000/partitions/partition@40000 or bad phandle (referred from ralink,num-gpios[0])
rm -f /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt3052_jcg_jhr-n926r.dtb.tmp
../dts/rt3050.dtsi:112.4-28: Warning (gpios_property): /palmbus@10000000/gpio@600:ralink,num-gpios: cell 0 is not a phandle reference
../dts/rt3050.dtsi:112.4-28: Warning (gpios_property): /palmbus@10000000/gpio@600:ralink,num-gpios: Could not get phandle node for (cell 0)
../dts/rt3050.dtsi:132.4-28: Warning (gpios_property): /palmbus@10000000/gpio@638:ralink,num-gpios: cell 0 is not a phandle reference
../dts/rt3050.dtsi:132.4-28: Warning (gpios_property): /palmbus@10000000/gpio@638:ralink,num-gpios: Could not get phandle node for (cell 0)
../dts/rt3050.dtsi:148.4-28: Warning (gpios_property): /palmbus@10000000/gpio@660:ralink,num-gpios: cell 0 is not a phandle reference
../dts/rt3050.dtsi:140.19-154.5: Warning (gpios_property): /palmbus@10000000/gpio@660: Missing property '#gpio-cells' in node /flash@1f000000/partitions/partition@40000 or bad phandle (referred from ralink,num-gpios[0])
mipsel-openwrt-linux-musl-cpp -nostdinc -x assembler-with-cpp -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/arch/mips/boot/dts -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/arch/mips/boot/dts/include -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/include/ -undef -D__DTS__  -o /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt5350_nexx_wt1520-8m.dtb.tmp ../dts/rt5350_nexx_wt1520-8m.dts
../dts/rt3050.dtsi:112.4-28: Warning (gpios_property): /palmbus@10000000/gpio@600:ralink,num-gpios: cell 0 is not a phandle reference
../dts/rt3050.dtsi:112.4-28: Warning (gpios_property): /palmbus@10000000/gpio@600:ralink,num-gpios: Could not get phandle node for (cell 0)
../dts/rt3050.dtsi:132.4-28: Warning (gpios_property): /palmbus@10000000/gpio@638:ralink,num-gpios: cell 0 is not a phandle reference
../dts/rt3050.dtsi:132.4-28: Warning (gpios_property): /palmbus@10000000/gpio@638:ralink,num-gpios: Could not get phandle node for (cell 0)
../dts/rt3050.dtsi:148.4-28: Warning (gpios_property): /palmbus@10000000/gpio@660:ralink,num-gpios: cell 0 is not a phandle reference
../dts/rt3050.dtsi:140.19-154.5: Warning (gpios_property): /palmbus@10000000/gpio@660: Missing property '#gpio-cells' in node /flash@1f000000/partitions/partition@40000 or bad phandle (referred from ralink,num-gpios[0])
/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/scripts/dtc/dtc -O dtb -i../dts/ -Wno-unit_address_vs_reg -Wno-simple_bus_reg -Wno-unit_address_format -Wno-pci_bridge -Wno-pci_device_bus_num -Wno-pci_device_reg -Wno-avoid_unnecessary_addr_size -Wno-alias_paths -Wno-graph_child_address -Wno-graph_port -Wno-unique_unit_address  -o /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt3050_netcore_nw718.dtb /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt3050_netcore_nw718.dtb.tmp
rm -f /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt3052_mofinetwork_mofi3500-3gn.dtb.tmp
/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/scripts/dtc/dtc -O dtb -i../dts/ -Wno-unit_address_vs_reg -Wno-simple_bus_reg -Wno-unit_address_format -Wno-pci_bridge -Wno-pci_device_bus_num -Wno-pci_device_reg -Wno-avoid_unnecessary_addr_size -Wno-alias_paths -Wno-graph_child_address -Wno-graph_port -Wno-unique_unit_address  -o /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt3052_netgear_wnce2001.dtb /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt3052_netgear_wnce2001.dtb.tmp
rm -f /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt3052_jcg_jhr-n825r.dtb.tmp
mipsel-openwrt-linux-musl-cpp -nostdinc -x assembler-with-cpp -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/arch/mips/boot/dts -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/arch/mips/boot/dts/include -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/include/ -undef -D__DTS__  -o /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt5350_nixcore_x1-16m.dtb.tmp ../dts/rt5350_nixcore_x1-16m.dts
/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/scripts/dtc/dtc -O dtb -i../dts/ -Wno-unit_address_vs_reg -Wno-simple_bus_reg -Wno-unit_address_format -Wno-pci_bridge -Wno-pci_device_bus_num -Wno-pci_device_reg -Wno-avoid_unnecessary_addr_size -Wno-alias_paths -Wno-graph_child_address -Wno-graph_port -Wno-unique_unit_address  -o /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt3052_nexaira_bc2.dtb /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt3052_nexaira_bc2.dtb.tmp
mipsel-openwrt-linux-musl-cpp -nostdinc -x assembler-with-cpp -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/arch/mips/boot/dts -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/arch/mips/boot/dts/include -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/include/ -undef -D__DTS__  -o /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt5350_nixcore_x1-8m.dtb.tmp ../dts/rt5350_nixcore_x1-8m.dts
../dts/rt3050.dtsi:112.4-28: Warning (gpios_property): /palmbus@10000000/gpio@600:ralink,num-gpios: cell 0 is not a phandle reference
../dts/rt3050.dtsi:112.4-28: Warning (gpios_property): /palmbus@10000000/gpio@600:ralink,num-gpios: Could not get phandle node for (cell 0)
../dts/rt3050.dtsi:132.4-28: Warning (gpios_property): /palmbus@10000000/gpio@638:ralink,num-gpios: cell 0 is not a phandle reference
../dts/rt3050.dtsi:132.4-28: Warning (gpios_property): /palmbus@10000000/gpio@638:ralink,num-gpios: Could not get phandle node for (cell 0)
../dts/rt3050.dtsi:148.4-28: Warning (gpios_property): /palmbus@10000000/gpio@660:ralink,num-gpios: cell 0 is not a phandle reference
../dts/rt3050.dtsi:140.19-154.5: Warning (gpios_property): /palmbus@10000000/gpio@660: Missing property '#gpio-cells' in node /palmbus@10000000/spi@b00/flash@0/partitions/partition@50000 or bad phandle (referred from ralink,num-gpios[0])
../dts/rt3050.dtsi:112.4-28: Warning (gpios_property): /palmbus@10000000/gpio@600:ralink,num-gpios: cell 0 is not a phandle reference
../dts/rt3050.dtsi:112.4-28: Warning (gpios_property): /palmbus@10000000/gpio@600:ralink,num-gpios: Could not get phandle node for (cell 0)
../dts/rt3050.dtsi:132.4-28: Warning (gpios_property): /palmbus@10000000/gpio@638:ralink,num-gpios: cell 0 is not a phandle reference
../dts/rt3050.dtsi:132.4-28: Warning (gpios_property): /palmbus@10000000/gpio@638:ralink,num-gpios: Could not get phandle node for (cell 0)
../dts/rt3050.dtsi:148.4-28: Warning (gpios_property): /palmbus@10000000/gpio@660:ralink,num-gpios: cell 0 is not a phandle reference
../dts/rt3050.dtsi:140.19-154.5: Warning (gpios_property): /palmbus@10000000/gpio@660: Missing property '#gpio-cells' in node /palmbus@10000000/spi@b00/flash@0/partitions/partition@30000 or bad phandle (referred from ralink,num-gpios[0])
rm -f /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt3050_netcore_nw718.dtb.tmp
rm -f /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt3052_netgear_wnce2001.dtb.tmp
../dts/rt3050.dtsi:112.4-28: Warning (gpios_property): /palmbus@10000000/gpio@600:ralink,num-gpios: cell 0 is not a phandle reference
../dts/rt3050.dtsi:112.4-28: Warning (gpios_property): /palmbus@10000000/gpio@600:ralink,num-gpios: Could not get phandle node for (cell 0)
../dts/rt3050.dtsi:132.4-28: Warning (gpios_property): /palmbus@10000000/gpio@638:ralink,num-gpios: cell 0 is not a phandle reference
../dts/rt3050.dtsi:132.4-28: Warning (gpios_property): /palmbus@10000000/gpio@638:ralink,num-gpios: Could not get phandle node for (cell 0)
../dts/rt3050.dtsi:148.4-28: Warning (gpios_property): /palmbus@10000000/gpio@660:ralink,num-gpios: cell 0 is not a phandle reference
mipsel-openwrt-linux-musl-cpp -nostdinc -x assembler-with-cpp -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/arch/mips/boot/dts -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/arch/mips/boot/dts/include -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/include/ -undef -D__DTS__  -o /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt5350_olimex_rt5350f-olinuxino.dtb.tmp ../dts/rt5350_olimex_rt5350f-olinuxino.dts
../dts/rt3050.dtsi:140.19-154.5: Warning (gpios_property): /palmbus@10000000/gpio@660: Missing property '#gpio-cells' in node /flash@1f000000/partitions/partition@40000 or bad phandle (referred from ralink,num-gpios[0])
rm -f /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt3052_nexaira_bc2.dtb.tmp
/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/scripts/dtc/dtc -O dtb -i../dts/ -Wno-unit_address_vs_reg -Wno-simple_bus_reg -Wno-unit_address_format -Wno-pci_bridge -Wno-pci_device_bus_num -Wno-pci_device_reg -Wno-avoid_unnecessary_addr_size -Wno-alias_paths -Wno-graph_child_address -Wno-graph_port -Wno-unique_unit_address  -o /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt5350_nexx_wt1520-4m.dtb /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt5350_nexx_wt1520-4m.dtb.tmp
mipsel-openwrt-linux-musl-cpp -nostdinc -x assembler-with-cpp -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/arch/mips/boot/dts -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/arch/mips/boot/dts/include -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/include/ -undef -D__DTS__  -o /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt5350_olimex_rt5350f-olinuxino-evb.dtb.tmp ../dts/rt5350_olimex_rt5350f-olinuxino-evb.dts
/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/scripts/dtc/dtc -O dtb -i../dts/ -Wno-unit_address_vs_reg -Wno-simple_bus_reg -Wno-unit_address_format -Wno-pci_bridge -Wno-pci_device_bus_num -Wno-pci_device_reg -Wno-avoid_unnecessary_addr_size -Wno-alias_paths -Wno-graph_child_address -Wno-graph_port -Wno-unique_unit_address  -o /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt5350_nexx_wt1520-8m.dtb /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt5350_nexx_wt1520-8m.dtb.tmp
mipsel-openwrt-linux-musl-cpp -nostdinc -x assembler-with-cpp -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/arch/mips/boot/dts -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/arch/mips/boot/dts/include -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/include/ -undef -D__DTS__  -o /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt5350_omnima_miniembplug.dtb.tmp ../dts/rt5350_omnima_miniembplug.dts
../dts/rt5350.dtsi:119.4-28: Warning (gpios_property): /palmbus@10000000/gpio@600:ralink,num-gpios: cell 0 is not a phandle reference
../dts/rt5350.dtsi:119.4-28: Warning (gpios_property): /palmbus@10000000/gpio@600:ralink,num-gpios: Could not get phandle node for (cell 0)
../dts/rt5350.dtsi:136.4-27: Warning (gpios_property): /palmbus@10000000/gpio@660:ralink,num-gpios: cell 0 is not a phandle reference
../dts/rt5350.dtsi:125.19-142.5: Warning (gpios_property): /palmbus@10000000/gpio@660: Missing property '#gpio-cells' in node /pinctrl/spi_pins or bad phandle (referred from ralink,num-gpios[0])
/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/scripts/dtc/dtc -O dtb -i../dts/ -Wno-unit_address_vs_reg -Wno-simple_bus_reg -Wno-unit_address_format -Wno-pci_bridge -Wno-pci_device_bus_num -Wno-pci_device_reg -Wno-avoid_unnecessary_addr_size -Wno-alias_paths -Wno-graph_child_address -Wno-graph_port -Wno-unique_unit_address  -o /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt5350_nixcore_x1-16m.dtb /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt5350_nixcore_x1-16m.dtb.tmp
/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/scripts/dtc/dtc -O dtb -i../dts/ -Wno-unit_address_vs_reg -Wno-simple_bus_reg -Wno-unit_address_format -Wno-pci_bridge -Wno-pci_device_bus_num -Wno-pci_device_reg -Wno-avoid_unnecessary_addr_size -Wno-alias_paths -Wno-graph_child_address -Wno-graph_port -Wno-unique_unit_address  -o /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt5350_nixcore_x1-8m.dtb /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt5350_nixcore_x1-8m.dtb.tmp
mipsel-openwrt-linux-musl-cpp -nostdinc -x assembler-with-cpp -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/arch/mips/boot/dts -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/arch/mips/boot/dts/include -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/include/ -undef -D__DTS__  -o /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt3052_omnima_miniembwifi.dtb.tmp ../dts/rt3052_omnima_miniembwifi.dts
rm -f /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt5350_nexx_wt1520-4m.dtb.tmp
../dts/rt5350.dtsi:119.4-28: Warning (gpios_property): /palmbus@10000000/gpio@600:ralink,num-gpios: cell 0 is not a phandle reference
../dts/rt5350.dtsi:119.4-28: Warning (gpios_property): /palmbus@10000000/gpio@600:ralink,num-gpios: Could not get phandle node for (cell 0)
../dts/rt5350.dtsi:136.4-27: Warning (gpios_property): /palmbus@10000000/gpio@660:ralink,num-gpios: cell 0 is not a phandle reference
../dts/rt5350.dtsi:125.19-142.5: Warning (gpios_property): /palmbus@10000000/gpio@660: Missing property '#gpio-cells' in node /pinctrl/spi_pins or bad phandle (referred from ralink,num-gpios[0])
rm -f /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt5350_nexx_wt1520-8m.dtb.tmp
../dts/rt5350.dtsi:119.4-28: Warning (gpios_property): /palmbus@10000000/gpio@600:ralink,num-gpios: cell 0 is not a phandle reference
../dts/rt5350.dtsi:119.4-28: Warning (gpios_property): /palmbus@10000000/gpio@600:ralink,num-gpios: Could not get phandle node for (cell 0)
../dts/rt5350.dtsi:136.4-27: Warning (gpios_property): /palmbus@10000000/gpio@660:ralink,num-gpios: cell 0 is not a phandle reference
../dts/rt5350.dtsi:125.19-142.5: Warning (gpios_property): /palmbus@10000000/gpio@660: Missing property '#gpio-cells' in node /pinctrl/spi_pins or bad phandle (referred from ralink,num-gpios[0])
  also defined at ../dts/rt5350_nixcore_x1.dtsi:115.8-117.3
rm -f /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt5350_nixcore_x1-16m.dtb.tmp
../dts/rt5350.dtsi:119.4-28: Warning (gpios_property): /palmbus@10000000/gpio@600:ralink,num-gpios: cell 0 is not a phandle reference
../dts/rt5350.dtsi:119.4-28: Warning (gpios_property): /palmbus@10000000/gpio@600:ralink,num-gpios: Could not get phandle node for (cell 0)
../dts/rt5350.dtsi:136.4-27: Warning (gpios_property): /palmbus@10000000/gpio@660:ralink,num-gpios: cell 0 is not a phandle reference
/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/scripts/dtc/dtc -O dtb -i../dts/ -Wno-unit_address_vs_reg -Wno-simple_bus_reg -Wno-unit_address_format -Wno-pci_bridge -Wno-pci_device_bus_num -Wno-pci_device_reg -Wno-avoid_unnecessary_addr_size -Wno-alias_paths -Wno-graph_child_address -Wno-graph_port -Wno-unique_unit_address  -o /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt5350_olimex_rt5350f-olinuxino.dtb /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt5350_olimex_rt5350f-olinuxino.dtb.tmp
../dts/rt5350.dtsi:125.19-142.5: Warning (gpios_property): /palmbus@10000000/gpio@660: Missing property '#gpio-cells' in node /pinctrl/spi_pins or bad phandle (referred from ralink,num-gpios[0])
  also defined at ../dts/rt5350_nixcore_x1.dtsi:115.8-117.3
rm -f /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt5350_nixcore_x1-8m.dtb.tmp
mipsel-openwrt-linux-musl-cpp -nostdinc -x assembler-with-cpp -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/arch/mips/boot/dts -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/arch/mips/boot/dts/include -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/include/ -undef -D__DTS__  -o /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt3052_petatel_psr-680w.dtb.tmp ../dts/rt3052_petatel_psr-680w.dts
/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/scripts/dtc/dtc -O dtb -i../dts/ -Wno-unit_address_vs_reg -Wno-simple_bus_reg -Wno-unit_address_format -Wno-pci_bridge -Wno-pci_device_bus_num -Wno-pci_device_reg -Wno-avoid_unnecessary_addr_size -Wno-alias_paths -Wno-graph_child_address -Wno-graph_port -Wno-unique_unit_address  -o /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt5350_omnima_miniembplug.dtb /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt5350_omnima_miniembplug.dtb.tmp
../dts/rt5350.dtsi:119.4-28: Warning (gpios_property): /palmbus@10000000/gpio@600:ralink,num-gpios: cell 0 is not a phandle reference
../dts/rt5350.dtsi:119.4-28: Warning (gpios_property): /palmbus@10000000/gpio@600:ralink,num-gpios: Could not get phandle node for (cell 0)
../dts/rt5350.dtsi:136.4-27: Warning (gpios_property): /palmbus@10000000/gpio@660:ralink,num-gpios: cell 0 is not a phandle reference
../dts/rt5350.dtsi:125.19-142.5: Warning (gpios_property): /palmbus@10000000/gpio@660: Missing property '#gpio-cells' in node /pinctrl/spi_pins or bad phandle (referred from ralink,num-gpios[0])
  also defined at ../dts/rt5350_olimex_rt5350f-olinuxino.dtsi:52.8-54.3
mipsel-openwrt-linux-musl-cpp -nostdinc -x assembler-with-cpp -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/arch/mips/boot/dts -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/arch/mips/boot/dts/include -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/include/ -undef -D__DTS__  -o /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt5350_planex_mzk-dp150n.dtb.tmp ../dts/rt5350_planex_mzk-dp150n.dts
rm -f /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt5350_olimex_rt5350f-olinuxino.dtb.tmp
/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/scripts/dtc/dtc -O dtb -i../dts/ -Wno-unit_address_vs_reg -Wno-simple_bus_reg -Wno-unit_address_format -Wno-pci_bridge -Wno-pci_device_bus_num -Wno-pci_device_reg -Wno-avoid_unnecessary_addr_size -Wno-alias_paths -Wno-graph_child_address -Wno-graph_port -Wno-unique_unit_address  -o /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt5350_olimex_rt5350f-olinuxino-evb.dtb /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt5350_olimex_rt5350f-olinuxino-evb.dtb.tmp
mipsel-openwrt-linux-musl-cpp -nostdinc -x assembler-with-cpp -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/arch/mips/boot/dts -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/arch/mips/boot/dts/include -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/include/ -undef -D__DTS__  -o /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt3052_planex_mzk-w300nh2.dtb.tmp ../dts/rt3052_planex_mzk-w300nh2.dts
mipsel-openwrt-linux-musl-cpp -nostdinc -x assembler-with-cpp -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/arch/mips/boot/dts -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/arch/mips/boot/dts/include -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/include/ -undef -D__DTS__  -o /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt3052_planex_mzk-wdpr.dtb.tmp ../dts/rt3052_planex_mzk-wdpr.dts
../dts/rt5350.dtsi:119.4-28: Warning (gpios_property): /palmbus@10000000/gpio@600:ralink,num-gpios: cell 0 is not a phandle reference
../dts/rt5350.dtsi:119.4-28: Warning (gpios_property): /palmbus@10000000/gpio@600:ralink,num-gpios: Could not get phandle node for (cell 0)
../dts/rt5350.dtsi:136.4-27: Warning (gpios_property): /palmbus@10000000/gpio@660:ralink,num-gpios: cell 0 is not a phandle reference
../dts/rt5350.dtsi:125.19-142.5: Warning (gpios_property): /palmbus@10000000/gpio@660: Missing property '#gpio-cells' in node /pinctrl/spi_pins or bad phandle (referred from ralink,num-gpios[0])
/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/scripts/dtc/dtc -O dtb -i../dts/ -Wno-unit_address_vs_reg -Wno-simple_bus_reg -Wno-unit_address_format -Wno-pci_bridge -Wno-pci_device_bus_num -Wno-pci_device_reg -Wno-avoid_unnecessary_addr_size -Wno-alias_paths -Wno-graph_child_address -Wno-graph_port -Wno-unique_unit_address  -o /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt3052_omnima_miniembwifi.dtb /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt3052_omnima_miniembwifi.dtb.tmp
rm -f /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt5350_omnima_miniembplug.dtb.tmp
mipsel-openwrt-linux-musl-cpp -nostdinc -x assembler-with-cpp -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/arch/mips/boot/dts -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/arch/mips/boot/dts/include -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/include/ -undef -D__DTS__  -o /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt3052_poray_ip2202.dtb.tmp ../dts/rt3052_poray_ip2202.dts
../dts/rt5350.dtsi:119.4-28: Warning (gpios_property): /palmbus@10000000/gpio@600:ralink,num-gpios: cell 0 is not a phandle reference
../dts/rt5350.dtsi:119.4-28: Warning (gpios_property): /palmbus@10000000/gpio@600:ralink,num-gpios: Could not get phandle node for (cell 0)
../dts/rt5350.dtsi:136.4-27: Warning (gpios_property): /palmbus@10000000/gpio@660:ralink,num-gpios: cell 0 is not a phandle reference
../dts/rt5350.dtsi:125.19-142.5: Warning (gpios_property): /palmbus@10000000/gpio@660: Missing property '#gpio-cells' in node /pinctrl/spi_pins or bad phandle (referred from ralink,num-gpios[0])
  also defined at ../dts/rt5350_olimex_rt5350f-olinuxino.dtsi:52.8-54.3
../dts/rt3050.dtsi:112.4-28: Warning (gpios_property): /palmbus@10000000/gpio@600:ralink,num-gpios: cell 0 is not a phandle reference
../dts/rt3050.dtsi:112.4-28: Warning (gpios_property): /palmbus@10000000/gpio@600:ralink,num-gpios: Could not get phandle node for (cell 0)
../dts/rt3050.dtsi:132.4-28: Warning (gpios_property): /palmbus@10000000/gpio@638:ralink,num-gpios: cell 0 is not a phandle reference
../dts/rt3050.dtsi:132.4-28: Warning (gpios_property): /palmbus@10000000/gpio@638:ralink,num-gpios: Could not get phandle node for (cell 0)
../dts/rt3050.dtsi:148.4-28: Warning (gpios_property): /palmbus@10000000/gpio@660:ralink,num-gpios: cell 0 is not a phandle reference
../dts/rt3050.dtsi:140.19-154.5: Warning (gpios_property): /palmbus@10000000/gpio@660: Missing property '#gpio-cells' in node /flash@1f000000/partitions/partition@40000 or bad phandle (referred from ralink,num-gpios[0])
rm -f /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt5350_olimex_rt5350f-olinuxino-evb.dtb.tmp
rm -f /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt3052_omnima_miniembwifi.dtb.tmp
mipsel-openwrt-linux-musl-cpp -nostdinc -x assembler-with-cpp -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/arch/mips/boot/dts -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/arch/mips/boot/dts/include -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/include/ -undef -D__DTS__  -o /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt5350_poray_m3.dtb.tmp ../dts/rt5350_poray_m3.dts
/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/scripts/dtc/dtc -O dtb -i../dts/ -Wno-unit_address_vs_reg -Wno-simple_bus_reg -Wno-unit_address_format -Wno-pci_bridge -Wno-pci_device_bus_num -Wno-pci_device_reg -Wno-avoid_unnecessary_addr_size -Wno-alias_paths -Wno-graph_child_address -Wno-graph_port -Wno-unique_unit_address  -o /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt3052_petatel_psr-680w.dtb /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt3052_petatel_psr-680w.dtb.tmp
mipsel-openwrt-linux-musl-cpp -nostdinc -x assembler-with-cpp -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/arch/mips/boot/dts -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/arch/mips/boot/dts/include -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/include/ -undef -D__DTS__  -o /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt5350_poray_m4-4m.dtb.tmp ../dts/rt5350_poray_m4-4m.dts
/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/scripts/dtc/dtc -O dtb -i../dts/ -Wno-unit_address_vs_reg -Wno-simple_bus_reg -Wno-unit_address_format -Wno-pci_bridge -Wno-pci_device_bus_num -Wno-pci_device_reg -Wno-avoid_unnecessary_addr_size -Wno-alias_paths -Wno-graph_child_address -Wno-graph_port -Wno-unique_unit_address  -o /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt3052_planex_mzk-w300nh2.dtb /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt3052_planex_mzk-w300nh2.dtb.tmp
../dts/rt3050.dtsi:112.4-28: Warning (gpios_property): /palmbus@10000000/gpio@600:ralink,num-gpios: cell 0 is not a phandle reference
../dts/rt3050.dtsi:112.4-28: Warning (gpios_property): /palmbus@10000000/gpio@600:ralink,num-gpios: Could not get phandle node for (cell 0)
../dts/rt3050.dtsi:132.4-28: Warning (gpios_property): /palmbus@10000000/gpio@638:ralink,num-gpios: cell 0 is not a phandle reference
../dts/rt3050.dtsi:132.4-28: Warning (gpios_property): /palmbus@10000000/gpio@638:ralink,num-gpios: Could not get phandle node for (cell 0)
../dts/rt3050.dtsi:148.4-28: Warning (gpios_property): /palmbus@10000000/gpio@660:ralink,num-gpios: cell 0 is not a phandle reference
../dts/rt3050.dtsi:140.19-154.5: Warning (gpios_property): /palmbus@10000000/gpio@660: Missing property '#gpio-cells' in node /flash@1f000000/partitions/partition@40000 or bad phandle (referred from ralink,num-gpios[0])
/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/scripts/dtc/dtc -O dtb -i../dts/ -Wno-unit_address_vs_reg -Wno-simple_bus_reg -Wno-unit_address_format -Wno-pci_bridge -Wno-pci_device_bus_num -Wno-pci_device_reg -Wno-avoid_unnecessary_addr_size -Wno-alias_paths -Wno-graph_child_address -Wno-graph_port -Wno-unique_unit_address  -o /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt3052_planex_mzk-wdpr.dtb /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt3052_planex_mzk-wdpr.dtb.tmp
rm -f /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt3052_petatel_psr-680w.dtb.tmp
mipsel-openwrt-linux-musl-cpp -nostdinc -x assembler-with-cpp -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/arch/mips/boot/dts -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/arch/mips/boot/dts/include -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/include/ -undef -D__DTS__  -o /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt5350_poray_m4-8m.dtb.tmp ../dts/rt5350_poray_m4-8m.dts
/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/scripts/dtc/dtc -O dtb -i../dts/ -Wno-unit_address_vs_reg -Wno-simple_bus_reg -Wno-unit_address_format -Wno-pci_bridge -Wno-pci_device_bus_num -Wno-pci_device_reg -Wno-avoid_unnecessary_addr_size -Wno-alias_paths -Wno-graph_child_address -Wno-graph_port -Wno-unique_unit_address  -o /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt5350_planex_mzk-dp150n.dtb /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt5350_planex_mzk-dp150n.dtb.tmp
mipsel-openwrt-linux-musl-cpp -nostdinc -x assembler-with-cpp -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/arch/mips/boot/dts -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/arch/mips/boot/dts/include -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/include/ -undef -D__DTS__  -o /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt5350_poray_x5.dtb.tmp ../dts/rt5350_poray_x5.dts
../dts/rt3050.dtsi:112.4-28: Warning (gpios_property): /palmbus@10000000/gpio@600:ralink,num-gpios: cell 0 is not a phandle reference
../dts/rt3050.dtsi:112.4-28: Warning (gpios_property): /palmbus@10000000/gpio@600:ralink,num-gpios: Could not get phandle node for (cell 0)
../dts/rt3050.dtsi:132.4-28: Warning (gpios_property): /palmbus@10000000/gpio@638:ralink,num-gpios: cell 0 is not a phandle reference
../dts/rt3050.dtsi:132.4-28: Warning (gpios_property): /palmbus@10000000/gpio@638:ralink,num-gpios: Could not get phandle node for (cell 0)
../dts/rt3050.dtsi:148.4-28: Warning (gpios_property): /palmbus@10000000/gpio@660:ralink,num-gpios: cell 0 is not a phandle reference
../dts/rt3050.dtsi:140.19-154.5: Warning (gpios_property): /palmbus@10000000/gpio@660: Missing property '#gpio-cells' in node /flash@1f000000/partitions/partition@40000 or bad phandle (referred from ralink,num-gpios[0])
../dts/rt3050.dtsi:112.4-28: Warning (gpios_property): /palmbus@10000000/gpio@600:ralink,num-gpios: cell 0 is not a phandle reference
../dts/rt3050.dtsi:112.4-28: Warning (gpios_property): /palmbus@10000000/gpio@600:ralink,num-gpios: Could not get phandle node for (cell 0)
../dts/rt3050.dtsi:132.4-28: Warning (gpios_property): /palmbus@10000000/gpio@638:ralink,num-gpios: cell 0 is not a phandle reference
../dts/rt3050.dtsi:132.4-28: Warning (gpios_property): /palmbus@10000000/gpio@638:ralink,num-gpios: Could not get phandle node for (cell 0)
../dts/rt3050.dtsi:148.4-28: Warning (gpios_property): /palmbus@10000000/gpio@660:ralink,num-gpios: cell 0 is not a phandle reference
../dts/rt3050.dtsi:140.19-154.5: Warning (gpios_property): /palmbus@10000000/gpio@660: Missing property '#gpio-cells' in node /flash@1f000000/partitions/partition@40000 or bad phandle (referred from ralink,num-gpios[0])
/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/scripts/dtc/dtc -O dtb -i../dts/ -Wno-unit_address_vs_reg -Wno-simple_bus_reg -Wno-unit_address_format -Wno-pci_bridge -Wno-pci_device_bus_num -Wno-pci_device_reg -Wno-avoid_unnecessary_addr_size -Wno-alias_paths -Wno-graph_child_address -Wno-graph_port -Wno-unique_unit_address  -o /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt5350_poray_m3.dtb /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt5350_poray_m3.dtb.tmp
rm -f /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt3052_planex_mzk-w300nh2.dtb.tmp
rm -f /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt3052_planex_mzk-wdpr.dtb.tmp
/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/scripts/dtc/dtc -O dtb -i../dts/ -Wno-unit_address_vs_reg -Wno-simple_bus_reg -Wno-unit_address_format -Wno-pci_bridge -Wno-pci_device_bus_num -Wno-pci_device_reg -Wno-avoid_unnecessary_addr_size -Wno-alias_paths -Wno-graph_child_address -Wno-graph_port -Wno-unique_unit_address  -o /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt3052_poray_ip2202.dtb /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt3052_poray_ip2202.dtb.tmp
../dts/rt5350.dtsi:119.4-28: Warning (gpios_property): /palmbus@10000000/gpio@600:ralink,num-gpios: cell 0 is not a phandle reference
../dts/rt5350.dtsi:119.4-28: Warning (gpios_property): /palmbus@10000000/gpio@600:ralink,num-gpios: Could not get phandle node for (cell 0)
../dts/rt5350.dtsi:136.4-27: Warning (gpios_property): /palmbus@10000000/gpio@660:ralink,num-gpios: cell 0 is not a phandle reference
../dts/rt5350.dtsi:125.19-142.5: Warning (gpios_property): /palmbus@10000000/gpio@660: Missing property '#gpio-cells' in node /pinctrl/spi_pins or bad phandle (referred from ralink,num-gpios[0])
  also defined at ../dts/rt5350_planex_mzk-dp150n.dts:40.8-42.3
rm -f /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt5350_planex_mzk-dp150n.dtb.tmp
../dts/rt5350.dtsi:119.4-28: Warning (gpios_property): /palmbus@10000000/gpio@600:ralink,num-gpios: cell 0 is not a phandle reference
../dts/rt5350.dtsi:119.4-28: Warning (gpios_property): /palmbus@10000000/gpio@600:ralink,num-gpios: Could not get phandle node for (cell 0)
../dts/rt5350.dtsi:136.4-27: Warning (gpios_property): /palmbus@10000000/gpio@660:ralink,num-gpios: cell 0 is not a phandle reference
../dts/rt5350.dtsi:125.19-142.5: Warning (gpios_property): /palmbus@10000000/gpio@660: Missing property '#gpio-cells' in node /pinctrl/spi_pins or bad phandle (referred from ralink,num-gpios[0])
rm -f /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt5350_poray_m3.dtb.tmp
mipsel-openwrt-linux-musl-cpp -nostdinc -x assembler-with-cpp -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/arch/mips/boot/dts -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/arch/mips/boot/dts/include -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/include/ -undef -D__DTS__  -o /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt5350_poray_x8.dtb.tmp ../dts/rt5350_poray_x8.dts
mipsel-openwrt-linux-musl-cpp -nostdinc -x assembler-with-cpp -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/arch/mips/boot/dts -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/arch/mips/boot/dts/include -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/include/ -undef -D__DTS__  -o /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt3052_prolink_pwh2004.dtb.tmp ../dts/rt3052_prolink_pwh2004.dts
../dts/rt3050.dtsi:112.4-28: Warning (gpios_property): /palmbus@10000000/gpio@600:ralink,num-gpios: cell 0 is not a phandle reference
../dts/rt3050.dtsi:112.4-28: Warning (gpios_property): /palmbus@10000000/gpio@600:ralink,num-gpios: Could not get phandle node for (cell 0)
../dts/rt3050.dtsi:132.4-28: Warning (gpios_property): /palmbus@10000000/gpio@638:ralink,num-gpios: cell 0 is not a phandle reference
../dts/rt3050.dtsi:132.4-28: Warning (gpios_property): /palmbus@10000000/gpio@638:ralink,num-gpios: Could not get phandle node for (cell 0)
../dts/rt3050.dtsi:148.4-28: Warning (gpios_property): /palmbus@10000000/gpio@660:ralink,num-gpios: cell 0 is not a phandle reference
../dts/rt3050.dtsi:140.19-154.5: Warning (gpios_property): /palmbus@10000000/gpio@660: Missing property '#gpio-cells' in node /flash@1f000000/partitions/partition@40000 or bad phandle (referred from ralink,num-gpios[0])
mipsel-openwrt-linux-musl-cpp -nostdinc -x assembler-with-cpp -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/arch/mips/boot/dts -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/arch/mips/boot/dts/include -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/include/ -undef -D__DTS__  -o /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt3052_ralink_v22rw-2x2.dtb.tmp ../dts/rt3052_ralink_v22rw-2x2.dts
/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/scripts/dtc/dtc -O dtb -i../dts/ -Wno-unit_address_vs_reg -Wno-simple_bus_reg -Wno-unit_address_format -Wno-pci_bridge -Wno-pci_device_bus_num -Wno-pci_device_reg -Wno-avoid_unnecessary_addr_size -Wno-alias_paths -Wno-graph_child_address -Wno-graph_port -Wno-unique_unit_address  -o /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt5350_poray_m4-4m.dtb /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt5350_poray_m4-4m.dtb.tmp
/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/scripts/dtc/dtc -O dtb -i../dts/ -Wno-unit_address_vs_reg -Wno-simple_bus_reg -Wno-unit_address_format -Wno-pci_bridge -Wno-pci_device_bus_num -Wno-pci_device_reg -Wno-avoid_unnecessary_addr_size -Wno-alias_paths -Wno-graph_child_address -Wno-graph_port -Wno-unique_unit_address  -o /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt5350_poray_m4-8m.dtb /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt5350_poray_m4-8m.dtb.tmp
/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/scripts/dtc/dtc -O dtb -i../dts/ -Wno-unit_address_vs_reg -Wno-simple_bus_reg -Wno-unit_address_format -Wno-pci_bridge -Wno-pci_device_bus_num -Wno-pci_device_reg -Wno-avoid_unnecessary_addr_size -Wno-alias_paths -Wno-graph_child_address -Wno-graph_port -Wno-unique_unit_address  -o /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt5350_poray_x5.dtb /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt5350_poray_x5.dtb.tmp
rm -f /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt3052_poray_ip2202.dtb.tmp
mipsel-openwrt-linux-musl-cpp -nostdinc -x assembler-with-cpp -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/arch/mips/boot/dts -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/arch/mips/boot/dts/include -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/include/ -undef -D__DTS__  -o /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt3052_sitecom_wl-351.dtb.tmp ../dts/rt3052_sitecom_wl-351.dts
../dts/rt5350.dtsi:119.4-28: Warning (gpios_property): /palmbus@10000000/gpio@600:ralink,num-gpios: cell 0 is not a phandle reference
../dts/rt5350.dtsi:119.4-28: Warning (gpios_property): /palmbus@10000000/gpio@600:ralink,num-gpios: Could not get phandle node for (cell 0)
../dts/rt5350.dtsi:136.4-27: Warning (gpios_property): /palmbus@10000000/gpio@660:ralink,num-gpios: cell 0 is not a phandle reference
../dts/rt5350.dtsi:125.19-142.5: Warning (gpios_property): /palmbus@10000000/gpio@660: Missing property '#gpio-cells' in node /pinctrl/spi_pins or bad phandle (referred from ralink,num-gpios[0])
rm -f /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt5350_poray_m4-8m.dtb.tmp
../dts/rt5350.dtsi:119.4-28: Warning (gpios_property): /palmbus@10000000/gpio@600:ralink,num-gpios: cell 0 is not a phandle reference
../dts/rt5350.dtsi:119.4-28: Warning (gpios_property): /palmbus@10000000/gpio@600:ralink,num-gpios: Could not get phandle node for (cell 0)
../dts/rt5350.dtsi:136.4-27: Warning (gpios_property): /palmbus@10000000/gpio@660:ralink,num-gpios: cell 0 is not a phandle reference
../dts/rt5350.dtsi:125.19-142.5: Warning (gpios_property): /palmbus@10000000/gpio@660: Missing property '#gpio-cells' in node /pinctrl/spi_pins or bad phandle (referred from ralink,num-gpios[0])
mipsel-openwrt-linux-musl-cpp -nostdinc -x assembler-with-cpp -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/arch/mips/boot/dts -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/arch/mips/boot/dts/include -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/include/ -undef -D__DTS__  -o /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt3052_skyline_sl-r7205.dtb.tmp ../dts/rt3052_skyline_sl-r7205.dts
../dts/rt5350.dtsi:119.4-28: Warning (gpios_property): /palmbus@10000000/gpio@600:ralink,num-gpios: cell 0 is not a phandle reference
../dts/rt5350.dtsi:119.4-28: Warning (gpios_property): /palmbus@10000000/gpio@600:ralink,num-gpios: Could not get phandle node for (cell 0)
../dts/rt5350.dtsi:136.4-27: Warning (gpios_property): /palmbus@10000000/gpio@660:ralink,num-gpios: cell 0 is not a phandle reference
../dts/rt5350.dtsi:125.19-142.5: Warning (gpios_property): /palmbus@10000000/gpio@660: Missing property '#gpio-cells' in node /pinctrl/spi_pins or bad phandle (referred from ralink,num-gpios[0])
rm -f /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt5350_poray_m4-4m.dtb.tmp
rm -f /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt5350_poray_x5.dtb.tmp
mipsel-openwrt-linux-musl-cpp -nostdinc -x assembler-with-cpp -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/arch/mips/boot/dts -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/arch/mips/boot/dts/include -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/include/ -undef -D__DTS__  -o /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt3050_sparklan_wcr-150gn.dtb.tmp ../dts/rt3050_sparklan_wcr-150gn.dts
/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/scripts/dtc/dtc -O dtb -i../dts/ -Wno-unit_address_vs_reg -Wno-simple_bus_reg -Wno-unit_address_format -Wno-pci_bridge -Wno-pci_device_bus_num -Wno-pci_device_reg -Wno-avoid_unnecessary_addr_size -Wno-alias_paths -Wno-graph_child_address -Wno-graph_port -Wno-unique_unit_address  -o /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt5350_poray_x8.dtb /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt5350_poray_x8.dtb.tmp
mipsel-openwrt-linux-musl-cpp -nostdinc -x assembler-with-cpp -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/arch/mips/boot/dts -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/arch/mips/boot/dts/include -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/include/ -undef -D__DTS__  -o /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt3050_teltonika_rut5xx.dtb.tmp ../dts/rt3050_teltonika_rut5xx.dts
/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/scripts/dtc/dtc -O dtb -i../dts/ -Wno-unit_address_vs_reg -Wno-simple_bus_reg -Wno-unit_address_format -Wno-pci_bridge -Wno-pci_device_bus_num -Wno-pci_device_reg -Wno-avoid_unnecessary_addr_size -Wno-alias_paths -Wno-graph_child_address -Wno-graph_port -Wno-unique_unit_address  -o /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt3052_prolink_pwh2004.dtb /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt3052_prolink_pwh2004.dtb.tmp
/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/scripts/dtc/dtc -O dtb -i../dts/ -Wno-unit_address_vs_reg -Wno-simple_bus_reg -Wno-unit_address_format -Wno-pci_bridge -Wno-pci_device_bus_num -Wno-pci_device_reg -Wno-avoid_unnecessary_addr_size -Wno-alias_paths -Wno-graph_child_address -Wno-graph_port -Wno-unique_unit_address  -o /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt3052_ralink_v22rw-2x2.dtb /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt3052_ralink_v22rw-2x2.dtb.tmp
/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/scripts/dtc/dtc -O dtb -i../dts/ -Wno-unit_address_vs_reg -Wno-simple_bus_reg -Wno-unit_address_format -Wno-pci_bridge -Wno-pci_device_bus_num -Wno-pci_device_reg -Wno-avoid_unnecessary_addr_size -Wno-alias_paths -Wno-graph_child_address -Wno-graph_port -Wno-unique_unit_address  -o /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt3052_sitecom_wl-351.dtb /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt3052_sitecom_wl-351.dtb.tmp
../dts/rt5350.dtsi:119.4-28: Warning (gpios_property): /palmbus@10000000/gpio@600:ralink,num-gpios: cell 0 is not a phandle reference
mipsel-openwrt-linux-musl-cpp -nostdinc -x assembler-with-cpp -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/arch/mips/boot/dts -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/arch/mips/boot/dts/include -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/include/ -undef -D__DTS__  -o /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt5350_tenda_3g150b.dtb.tmp ../dts/rt5350_tenda_3g150b.dts
../dts/rt5350.dtsi:119.4-28: Warning (gpios_property): /palmbus@10000000/gpio@600:ralink,num-gpios: Could not get phandle node for (cell 0)
../dts/rt5350.dtsi:136.4-27: Warning (gpios_property): /palmbus@10000000/gpio@660:ralink,num-gpios: cell 0 is not a phandle reference
../dts/rt5350.dtsi:125.19-142.5: Warning (gpios_property): /palmbus@10000000/gpio@660: Missing property '#gpio-cells' in node /pinctrl/spi_pins or bad phandle (referred from ralink,num-gpios[0])
rm -f /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt5350_poray_x8.dtb.tmp
../dts/rt3050.dtsi:112.4-28: Warning (gpios_property): /palmbus@10000000/gpio@600:ralink,num-gpios: cell 0 is not a phandle reference
../dts/rt3050.dtsi:112.4-28: Warning (gpios_property): /palmbus@10000000/gpio@600:ralink,num-gpios: cell 0 is not a phandle reference
../dts/rt3050.dtsi:112.4-28: Warning (gpios_property): /palmbus@10000000/gpio@600:ralink,num-gpios: Could not get phandle node for (cell 0)
../dts/rt3050.dtsi:112.4-28: Warning (gpios_property): /palmbus@10000000/gpio@600:ralink,num-gpios: Could not get phandle node for (cell 0)
../dts/rt3050.dtsi:132.4-28: Warning (gpios_property): /palmbus@10000000/gpio@638:ralink,num-gpios: cell 0 is not a phandle reference
../dts/rt3050.dtsi:132.4-28: Warning (gpios_property): /palmbus@10000000/gpio@638:ralink,num-gpios: cell 0 is not a phandle reference
../dts/rt3050.dtsi:132.4-28: Warning (gpios_property): /palmbus@10000000/gpio@638:ralink,num-gpios: Could not get phandle node for (cell 0)
../dts/rt3050.dtsi:132.4-28: Warning (gpios_property): /palmbus@10000000/gpio@638:ralink,num-gpios: Could not get phandle node for (cell 0)
../dts/rt3050.dtsi:148.4-28: Warning (gpios_property): /palmbus@10000000/gpio@660:ralink,num-gpios: cell 0 is not a phandle reference
../dts/rt3050.dtsi:148.4-28: Warning (gpios_property): /palmbus@10000000/gpio@660:ralink,num-gpios: cell 0 is not a phandle reference
../dts/rt3050.dtsi:140.19-154.5: Warning (gpios_property): /palmbus@10000000/gpio@660: Missing property '#gpio-cells' in node /flash@1f000000/partitions/partition@40000 or bad phandle (referred from ralink,num-gpios[0])
../dts/rt3050.dtsi:140.19-154.5: Warning (gpios_property): /palmbus@10000000/gpio@660: Missing property '#gpio-cells' in node /flash@1f000000/partitions/partition@40000 or bad phandle (referred from ralink,num-gpios[0])
/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/scripts/dtc/dtc -O dtb -i../dts/ -Wno-unit_address_vs_reg -Wno-simple_bus_reg -Wno-unit_address_format -Wno-pci_bridge -Wno-pci_device_bus_num -Wno-pci_device_reg -Wno-avoid_unnecessary_addr_size -Wno-alias_paths -Wno-graph_child_address -Wno-graph_port -Wno-unique_unit_address  -o /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt3052_skyline_sl-r7205.dtb /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt3052_skyline_sl-r7205.dtb.tmp
rm -f /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt3052_prolink_pwh2004.dtb.tmp
rm -f /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt3052_ralink_v22rw-2x2.dtb.tmp
../dts/rt3050.dtsi:112.4-28: Warning (gpios_property): /palmbus@10000000/gpio@600:ralink,num-gpios: cell 0 is not a phandle reference
../dts/rt3050.dtsi:112.4-28: Warning (gpios_property): /palmbus@10000000/gpio@600:ralink,num-gpios: Could not get phandle node for (cell 0)
../dts/rt3050.dtsi:132.4-28: Warning (gpios_property): /palmbus@10000000/gpio@638:ralink,num-gpios: cell 0 is not a phandle reference
../dts/rt3050.dtsi:132.4-28: Warning (gpios_property): /palmbus@10000000/gpio@638:ralink,num-gpios: Could not get phandle node for (cell 0)
../dts/rt3050.dtsi:148.4-28: Warning (gpios_property): /palmbus@10000000/gpio@660:ralink,num-gpios: cell 0 is not a phandle reference
../dts/rt3050.dtsi:140.19-154.5: Warning (gpios_property): /palmbus@10000000/gpio@660: Missing property '#gpio-cells' in node /flash@1f000000/partitions/partition@40000 or bad phandle (referred from ralink,num-gpios[0])
mipsel-openwrt-linux-musl-cpp -nostdinc -x assembler-with-cpp -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/arch/mips/boot/dts -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/arch/mips/boot/dts/include -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/include/ -undef -D__DTS__  -o /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt3052_tenda_3g300m.dtb.tmp ../dts/rt3052_tenda_3g300m.dts
../dts/rt3050.dtsi:112.4-28: Warning (gpios_property): /palmbus@10000000/gpio@600:ralink,num-gpios: cell 0 is not a phandle reference
../dts/rt3050.dtsi:112.4-28: Warning (gpios_property): /palmbus@10000000/gpio@600:ralink,num-gpios: Could not get phandle node for (cell 0)
../dts/rt3050.dtsi:132.4-28: Warning (gpios_property): /palmbus@10000000/gpio@638:ralink,num-gpios: cell 0 is not a phandle reference
../dts/rt3050.dtsi:132.4-28: Warning (gpios_property): /palmbus@10000000/gpio@638:ralink,num-gpios: Could not get phandle node for (cell 0)
../dts/rt3050.dtsi:148.4-28: Warning (gpios_property): /palmbus@10000000/gpio@660:ralink,num-gpios: cell 0 is not a phandle reference
../dts/rt3050.dtsi:140.19-154.5: Warning (gpios_property): /palmbus@10000000/gpio@660: Missing property '#gpio-cells' in node /flash@1f000000/partitions/partition@40000 or bad phandle (referred from ralink,num-gpios[0])
rm -f /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt3052_sitecom_wl-351.dtb.tmp
mipsel-openwrt-linux-musl-cpp -nostdinc -x assembler-with-cpp -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/arch/mips/boot/dts -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/arch/mips/boot/dts/include -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/include/ -undef -D__DTS__  -o /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt3050_tenda_w150m.dtb.tmp ../dts/rt3050_tenda_w150m.dts
/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/scripts/dtc/dtc -O dtb -i../dts/ -Wno-unit_address_vs_reg -Wno-simple_bus_reg -Wno-unit_address_format -Wno-pci_bridge -Wno-pci_device_bus_num -Wno-pci_device_reg -Wno-avoid_unnecessary_addr_size -Wno-alias_paths -Wno-graph_child_address -Wno-graph_port -Wno-unique_unit_address  -o /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt3050_sparklan_wcr-150gn.dtb /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt3050_sparklan_wcr-150gn.dtb.tmp
/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/scripts/dtc/dtc -O dtb -i../dts/ -Wno-unit_address_vs_reg -Wno-simple_bus_reg -Wno-unit_address_format -Wno-pci_bridge -Wno-pci_device_bus_num -Wno-pci_device_reg -Wno-avoid_unnecessary_addr_size -Wno-alias_paths -Wno-graph_child_address -Wno-graph_port -Wno-unique_unit_address  -o /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt3050_teltonika_rut5xx.dtb /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt3050_teltonika_rut5xx.dtb.tmp
rm -f /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt3052_skyline_sl-r7205.dtb.tmp
mipsel-openwrt-linux-musl-cpp -nostdinc -x assembler-with-cpp -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/arch/mips/boot/dts -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/arch/mips/boot/dts/include -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/include/ -undef -D__DTS__  -o /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt3052_tenda_w306r-v2.dtb.tmp ../dts/rt3052_tenda_w306r-v2.dts
mipsel-openwrt-linux-musl-cpp -nostdinc -x assembler-with-cpp -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/arch/mips/boot/dts -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/arch/mips/boot/dts/include -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/include/ -undef -D__DTS__  -o /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt3050_trendnet_tew-638apb-v2.dtb.tmp ../dts/rt3050_trendnet_tew-638apb-v2.dts
../dts/rt3050.dtsi:112.4-28: Warning (gpios_property): /palmbus@10000000/gpio@600:ralink,num-gpios: cell 0 is not a phandle reference
../dts/rt3050.dtsi:112.4-28: Warning (gpios_property): /palmbus@10000000/gpio@600:ralink,num-gpios: Could not get phandle node for (cell 0)
../dts/rt3050.dtsi:132.4-28: Warning (gpios_property): /palmbus@10000000/gpio@638:ralink,num-gpios: cell 0 is not a phandle reference
../dts/rt3050.dtsi:132.4-28: Warning (gpios_property): /palmbus@10000000/gpio@638:ralink,num-gpios: Could not get phandle node for (cell 0)
../dts/rt3050.dtsi:148.4-28: Warning (gpios_property): /palmbus@10000000/gpio@660:ralink,num-gpios: cell 0 is not a phandle reference
../dts/rt3050.dtsi:140.19-154.5: Warning (gpios_property): /palmbus@10000000/gpio@660: Missing property '#gpio-cells' in node /flash@1f000000/partitions/partition@40000 or bad phandle (referred from ralink,num-gpios[0])
/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/scripts/dtc/dtc -O dtb -i../dts/ -Wno-unit_address_vs_reg -Wno-simple_bus_reg -Wno-unit_address_format -Wno-pci_bridge -Wno-pci_device_bus_num -Wno-pci_device_reg -Wno-avoid_unnecessary_addr_size -Wno-alias_paths -Wno-graph_child_address -Wno-graph_port -Wno-unique_unit_address  -o /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt5350_tenda_3g150b.dtb /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt5350_tenda_3g150b.dtb.tmp
mipsel-openwrt-linux-musl-cpp -nostdinc -x assembler-with-cpp -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/arch/mips/boot/dts -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/arch/mips/boot/dts/include -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/include/ -undef -D__DTS__  -o /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt5350_trendnet_tew-714tru.dtb.tmp ../dts/rt5350_trendnet_tew-714tru.dts
../dts/rt3050.dtsi:112.4-28: Warning (gpios_property): /palmbus@10000000/gpio@600:ralink,num-gpios: cell 0 is not a phandle reference
../dts/rt3050.dtsi:112.4-28: Warning (gpios_property): /palmbus@10000000/gpio@600:ralink,num-gpios: Could not get phandle node for (cell 0)
../dts/rt3050.dtsi:132.4-28: Warning (gpios_property): /palmbus@10000000/gpio@638:ralink,num-gpios: cell 0 is not a phandle reference
../dts/rt3050.dtsi:132.4-28: Warning (gpios_property): /palmbus@10000000/gpio@638:ralink,num-gpios: Could not get phandle node for (cell 0)
../dts/rt3050.dtsi:148.4-28: Warning (gpios_property): /palmbus@10000000/gpio@660:ralink,num-gpios: cell 0 is not a phandle reference
../dts/rt3050.dtsi:140.19-154.5: Warning (gpios_property): /palmbus@10000000/gpio@660: Missing property '#gpio-cells' in node /palmbus@10000000/spi@b00/flash@0/partitions/partition@40000 or bad phandle (referred from ralink,num-gpios[0])
rm -f /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt3050_sparklan_wcr-150gn.dtb.tmp
rm -f /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt3050_teltonika_rut5xx.dtb.tmp
../dts/rt5350.dtsi:119.4-28: Warning (gpios_property): /palmbus@10000000/gpio@600:ralink,num-gpios: cell 0 is not a phandle reference
../dts/rt5350.dtsi:119.4-28: Warning (gpios_property): /palmbus@10000000/gpio@600:ralink,num-gpios: Could not get phandle node for (cell 0)
../dts/rt5350.dtsi:136.4-27: Warning (gpios_property): /palmbus@10000000/gpio@660:ralink,num-gpios: cell 0 is not a phandle reference
../dts/rt5350.dtsi:125.19-142.5: Warning (gpios_property): /palmbus@10000000/gpio@660: Missing property '#gpio-cells' in node /pinctrl/spi_pins or bad phandle (referred from ralink,num-gpios[0])
  also defined at ../dts/rt5350_tenda_3g150b.dts:98.8-100.3
/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/scripts/dtc/dtc -O dtb -i../dts/ -Wno-unit_address_vs_reg -Wno-simple_bus_reg -Wno-unit_address_format -Wno-pci_bridge -Wno-pci_device_bus_num -Wno-pci_device_reg -Wno-avoid_unnecessary_addr_size -Wno-alias_paths -Wno-graph_child_address -Wno-graph_port -Wno-unique_unit_address  -o /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt3052_tenda_3g300m.dtb /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt3052_tenda_3g300m.dtb.tmp
rm -f /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt5350_tenda_3g150b.dtb.tmp
mipsel-openwrt-linux-musl-cpp -nostdinc -x assembler-with-cpp -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/arch/mips/boot/dts -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/arch/mips/boot/dts/include -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/include/ -undef -D__DTS__  -o /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt5350_unbranded_a5-v11.dtb.tmp ../dts/rt5350_unbranded_a5-v11.dts
mipsel-openwrt-linux-musl-cpp -nostdinc -x assembler-with-cpp -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/arch/mips/boot/dts -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/arch/mips/boot/dts/include -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/include/ -undef -D__DTS__  -o /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt3052_unbranded_wr512-3gn-4m.dtb.tmp ../dts/rt3052_unbranded_wr512-3gn-4m.dts
../dts/rt3050.dtsi:112.4-28: Warning (gpios_property): /palmbus@10000000/gpio@600:ralink,num-gpios: cell 0 is not a phandle reference
../dts/rt3050.dtsi:112.4-28: Warning (gpios_property): /palmbus@10000000/gpio@600:ralink,num-gpios: Could not get phandle node for (cell 0)
../dts/rt3050.dtsi:132.4-28: Warning (gpios_property): /palmbus@10000000/gpio@638:ralink,num-gpios: cell 0 is not a phandle reference
../dts/rt3050.dtsi:132.4-28: Warning (gpios_property): /palmbus@10000000/gpio@638:ralink,num-gpios: Could not get phandle node for (cell 0)
../dts/rt3050.dtsi:148.4-28: Warning (gpios_property): /palmbus@10000000/gpio@660:ralink,num-gpios: cell 0 is not a phandle reference
../dts/rt3050.dtsi:140.19-154.5: Warning (gpios_property): /palmbus@10000000/gpio@660: Missing property '#gpio-cells' in node /palmbus@10000000/spi@b00/flash@0/partitions/partition@40000 or bad phandle (referred from ralink,num-gpios[0])
/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/scripts/dtc/dtc -O dtb -i../dts/ -Wno-unit_address_vs_reg -Wno-simple_bus_reg -Wno-unit_address_format -Wno-pci_bridge -Wno-pci_device_bus_num -Wno-pci_device_reg -Wno-avoid_unnecessary_addr_size -Wno-alias_paths -Wno-graph_child_address -Wno-graph_port -Wno-unique_unit_address  -o /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt3050_tenda_w150m.dtb /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt3050_tenda_w150m.dtb.tmp
rm -f /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt3052_tenda_3g300m.dtb.tmp
mipsel-openwrt-linux-musl-cpp -nostdinc -x assembler-with-cpp -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/arch/mips/boot/dts -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/arch/mips/boot/dts/include -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/include/ -undef -D__DTS__  -o /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt3052_unbranded_wr512-3gn-8m.dtb.tmp ../dts/rt3052_unbranded_wr512-3gn-8m.dts
/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/scripts/dtc/dtc -O dtb -i../dts/ -Wno-unit_address_vs_reg -Wno-simple_bus_reg -Wno-unit_address_format -Wno-pci_bridge -Wno-pci_device_bus_num -Wno-pci_device_reg -Wno-avoid_unnecessary_addr_size -Wno-alias_paths -Wno-graph_child_address -Wno-graph_port -Wno-unique_unit_address  -o /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt3050_trendnet_tew-638apb-v2.dtb /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt3050_trendnet_tew-638apb-v2.dtb.tmp
mipsel-openwrt-linux-musl-cpp -nostdinc -x assembler-with-cpp -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/arch/mips/boot/dts -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/arch/mips/boot/dts/include -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/include/ -undef -D__DTS__  -o /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt3052_unbranded_xdx-rn502j.dtb.tmp ../dts/rt3052_unbranded_xdx-rn502j.dts
../dts/rt3050.dtsi:112.4-28: Warning (gpios_property): /palmbus@10000000/gpio@600:ralink,num-gpios: cell 0 is not a phandle reference
../dts/rt3050.dtsi:112.4-28: Warning (gpios_property): /palmbus@10000000/gpio@600:ralink,num-gpios: Could not get phandle node for (cell 0)
../dts/rt3050.dtsi:132.4-28: Warning (gpios_property): /palmbus@10000000/gpio@638:ralink,num-gpios: cell 0 is not a phandle reference
../dts/rt3050.dtsi:132.4-28: Warning (gpios_property): /palmbus@10000000/gpio@638:ralink,num-gpios: Could not get phandle node for (cell 0)
../dts/rt3050.dtsi:148.4-28: Warning (gpios_property): /palmbus@10000000/gpio@660:ralink,num-gpios: cell 0 is not a phandle reference
../dts/rt3050.dtsi:140.19-154.5: Warning (gpios_property): /palmbus@10000000/gpio@660: Missing property '#gpio-cells' in node /flash@1f000000/partitions/partition@40000 or bad phandle (referred from ralink,num-gpios[0])
/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/scripts/dtc/dtc -O dtb -i../dts/ -Wno-unit_address_vs_reg -Wno-simple_bus_reg -Wno-unit_address_format -Wno-pci_bridge -Wno-pci_device_bus_num -Wno-pci_device_reg -Wno-avoid_unnecessary_addr_size -Wno-alias_paths -Wno-graph_child_address -Wno-graph_port -Wno-unique_unit_address  -o /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt3052_tenda_w306r-v2.dtb /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt3052_tenda_w306r-v2.dtb.tmp
rm -f /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt3050_tenda_w150m.dtb.tmp
/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/scripts/dtc/dtc -O dtb -i../dts/ -Wno-unit_address_vs_reg -Wno-simple_bus_reg -Wno-unit_address_format -Wno-pci_bridge -Wno-pci_device_bus_num -Wno-pci_device_reg -Wno-avoid_unnecessary_addr_size -Wno-alias_paths -Wno-graph_child_address -Wno-graph_port -Wno-unique_unit_address  -o /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt5350_trendnet_tew-714tru.dtb /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt5350_trendnet_tew-714tru.dtb.tmp
../dts/rt3050.dtsi:112.4-28: Warning (gpios_property): /palmbus@10000000/gpio@600:ralink,num-gpios: cell 0 is not a phandle reference
../dts/rt3050.dtsi:112.4-28: Warning (gpios_property): /palmbus@10000000/gpio@600:ralink,num-gpios: Could not get phandle node for (cell 0)
../dts/rt3050.dtsi:132.4-28: Warning (gpios_property): /palmbus@10000000/gpio@638:ralink,num-gpios: cell 0 is not a phandle reference
../dts/rt3050.dtsi:132.4-28: Warning (gpios_property): /palmbus@10000000/gpio@638:ralink,num-gpios: Could not get phandle node for (cell 0)
../dts/rt3050.dtsi:148.4-28: Warning (gpios_property): /palmbus@10000000/gpio@660:ralink,num-gpios: cell 0 is not a phandle reference
../dts/rt3050.dtsi:140.19-154.5: Warning (gpios_property): /palmbus@10000000/gpio@660: Missing property '#gpio-cells' in node /flash@1f000000/partitions/partition@40000 or bad phandle (referred from ralink,num-gpios[0])
/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/scripts/dtc/dtc -O dtb -i../dts/ -Wno-unit_address_vs_reg -Wno-simple_bus_reg -Wno-unit_address_format -Wno-pci_bridge -Wno-pci_device_bus_num -Wno-pci_device_reg -Wno-avoid_unnecessary_addr_size -Wno-alias_paths -Wno-graph_child_address -Wno-graph_port -Wno-unique_unit_address  -o /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt5350_unbranded_a5-v11.dtb /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt5350_unbranded_a5-v11.dtb.tmp
rm -f /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt3050_trendnet_tew-638apb-v2.dtb.tmp
mipsel-openwrt-linux-musl-cpp -nostdinc -x assembler-with-cpp -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/arch/mips/boot/dts -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/arch/mips/boot/dts/include -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/include/ -undef -D__DTS__  -o /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt3052_upvel_ur-326n4g.dtb.tmp ../dts/rt3052_upvel_ur-326n4g.dts
../dts/rt3050.dtsi:112.4-28: Warning (gpios_property): /palmbus@10000000/gpio@600:ralink,num-gpios: cell 0 is not a phandle reference
../dts/rt3050.dtsi:112.4-28: Warning (gpios_property): /palmbus@10000000/gpio@600:ralink,num-gpios: Could not get phandle node for (cell 0)
../dts/rt3050.dtsi:132.4-28: Warning (gpios_property): /palmbus@10000000/gpio@638:ralink,num-gpios: cell 0 is not a phandle reference
../dts/rt3050.dtsi:132.4-28: Warning (gpios_property): /palmbus@10000000/gpio@638:ralink,num-gpios: Could not get phandle node for (cell 0)
../dts/rt3050.dtsi:148.4-28: Warning (gpios_property): /palmbus@10000000/gpio@660:ralink,num-gpios: cell 0 is not a phandle reference
../dts/rt3050.dtsi:140.19-154.5: Warning (gpios_property): /palmbus@10000000/gpio@660: Missing property '#gpio-cells' in node /flash@1f000000/partitions/partition@40000 or bad phandle (referred from ralink,num-gpios[0])
rm -f /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt3052_tenda_w306r-v2.dtb.tmp
/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/scripts/dtc/dtc -O dtb -i../dts/ -Wno-unit_address_vs_reg -Wno-simple_bus_reg -Wno-unit_address_format -Wno-pci_bridge -Wno-pci_device_bus_num -Wno-pci_device_reg -Wno-avoid_unnecessary_addr_size -Wno-alias_paths -Wno-graph_child_address -Wno-graph_port -Wno-unique_unit_address  -o /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt3052_unbranded_wr512-3gn-4m.dtb /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt3052_unbranded_wr512-3gn-4m.dtb.tmp
/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/scripts/dtc/dtc -O dtb -i../dts/ -Wno-unit_address_vs_reg -Wno-simple_bus_reg -Wno-unit_address_format -Wno-pci_bridge -Wno-pci_device_bus_num -Wno-pci_device_reg -Wno-avoid_unnecessary_addr_size -Wno-alias_paths -Wno-graph_child_address -Wno-graph_port -Wno-unique_unit_address  -o /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt3052_unbranded_wr512-3gn-8m.dtb /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt3052_unbranded_wr512-3gn-8m.dtb.tmp
../dts/rt5350.dtsi:119.4-28: Warning (gpios_property): /palmbus@10000000/gpio@600:ralink,num-gpios: cell 0 is not a phandle reference
../dts/rt5350.dtsi:119.4-28: Warning (gpios_property): /palmbus@10000000/gpio@600:ralink,num-gpios: Could not get phandle node for (cell 0)
../dts/rt5350.dtsi:136.4-27: Warning (gpios_property): /palmbus@10000000/gpio@660:ralink,num-gpios: cell 0 is not a phandle reference
../dts/rt5350.dtsi:125.19-142.5: Warning (gpios_property): /palmbus@10000000/gpio@660: Missing property '#gpio-cells' in node /pinctrl/spi_pins or bad phandle (referred from ralink,num-gpios[0])
rm -f /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt5350_trendnet_tew-714tru.dtb.tmp
mipsel-openwrt-linux-musl-cpp -nostdinc -x assembler-with-cpp -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/arch/mips/boot/dts -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/arch/mips/boot/dts/include -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/include/ -undef -D__DTS__  -o /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt3052_upvel_ur-336un.dtb.tmp ../dts/rt3052_upvel_ur-336un.dts
../dts/rt5350.dtsi:119.4-28: Warning (gpios_property): /palmbus@10000000/gpio@600:ralink,num-gpios: cell 0 is not a phandle reference
../dts/rt5350.dtsi:119.4-28: Warning (gpios_property): /palmbus@10000000/gpio@600:ralink,num-gpios: Could not get phandle node for (cell 0)
../dts/rt5350.dtsi:136.4-27: Warning (gpios_property): /palmbus@10000000/gpio@660:ralink,num-gpios: cell 0 is not a phandle reference
../dts/rt5350.dtsi:125.19-142.5: Warning (gpios_property): /palmbus@10000000/gpio@660: Missing property '#gpio-cells' in node /pinctrl/spi_pins or bad phandle (referred from ralink,num-gpios[0])
  also defined at ../dts/rt5350_unbranded_a5-v11.dts:103.8-105.3
../dts/rt3050.dtsi:112.4-28: Warning (gpios_property): /palmbus@10000000/gpio@600:ralink,num-gpios: cell 0 is not a phandle reference
../dts/rt3050.dtsi:112.4-28: Warning (gpios_property): /palmbus@10000000/gpio@600:ralink,num-gpios: Could not get phandle node for (cell 0)
../dts/rt3050.dtsi:132.4-28: Warning (gpios_property): /palmbus@10000000/gpio@638:ralink,num-gpios: cell 0 is not a phandle reference
../dts/rt3050.dtsi:132.4-28: Warning (gpios_property): /palmbus@10000000/gpio@638:ralink,num-gpios: Could not get phandle node for (cell 0)
../dts/rt3050.dtsi:148.4-28: Warning (gpios_property): /palmbus@10000000/gpio@660:ralink,num-gpios: cell 0 is not a phandle reference
../dts/rt3050.dtsi:140.19-154.5: Warning (gpios_property): /palmbus@10000000/gpio@660: Missing property '#gpio-cells' in node /flash@1f000000/partitions/partition@40000 or bad phandle (referred from ralink,num-gpios[0])
../dts/rt3050.dtsi:112.4-28: Warning (gpios_property): /palmbus@10000000/gpio@600:ralink,num-gpios: cell 0 is not a phandle reference
../dts/rt3050.dtsi:112.4-28: Warning (gpios_property): /palmbus@10000000/gpio@600:ralink,num-gpios: Could not get phandle node for (cell 0)
../dts/rt3050.dtsi:132.4-28: Warning (gpios_property): /palmbus@10000000/gpio@638:ralink,num-gpios: cell 0 is not a phandle reference
../dts/rt3050.dtsi:132.4-28: Warning (gpios_property): /palmbus@10000000/gpio@638:ralink,num-gpios: Could not get phandle node for (cell 0)
../dts/rt3050.dtsi:148.4-28: Warning (gpios_property): /palmbus@10000000/gpio@660:ralink,num-gpios: cell 0 is not a phandle reference
../dts/rt3050.dtsi:140.19-154.5: Warning (gpios_property): /palmbus@10000000/gpio@660: Missing property '#gpio-cells' in node /flash@1f000000/partitions/partition@40000 or bad phandle (referred from ralink,num-gpios[0])
/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/scripts/dtc/dtc -O dtb -i../dts/ -Wno-unit_address_vs_reg -Wno-simple_bus_reg -Wno-unit_address_format -Wno-pci_bridge -Wno-pci_device_bus_num -Wno-pci_device_reg -Wno-avoid_unnecessary_addr_size -Wno-alias_paths -Wno-graph_child_address -Wno-graph_port -Wno-unique_unit_address  -o /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt3052_unbranded_xdx-rn502j.dtb /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt3052_unbranded_xdx-rn502j.dtb.tmp
rm -f /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt5350_unbranded_a5-v11.dtb.tmp
rm -f /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt3052_unbranded_wr512-3gn-4m.dtb.tmp
rm -f /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt3052_unbranded_wr512-3gn-8m.dtb.tmp
mipsel-openwrt-linux-musl-cpp -nostdinc -x assembler-with-cpp -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/arch/mips/boot/dts -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/arch/mips/boot/dts/include -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/include/ -undef -D__DTS__  -o /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt5350_vocore_vocore-16m.dtb.tmp ../dts/rt5350_vocore_vocore-16m.dts
mipsel-openwrt-linux-musl-cpp -nostdinc -x assembler-with-cpp -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/arch/mips/boot/dts -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/arch/mips/boot/dts/include -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/include/ -undef -D__DTS__  -o /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt5350_vocore_vocore-8m.dtb.tmp ../dts/rt5350_vocore_vocore-8m.dts
/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/scripts/dtc/dtc -O dtb -i../dts/ -Wno-unit_address_vs_reg -Wno-simple_bus_reg -Wno-unit_address_format -Wno-pci_bridge -Wno-pci_device_bus_num -Wno-pci_device_reg -Wno-avoid_unnecessary_addr_size -Wno-alias_paths -Wno-graph_child_address -Wno-graph_port -Wno-unique_unit_address  -o /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt3052_upvel_ur-326n4g.dtb /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt3052_upvel_ur-326n4g.dtb.tmp
../dts/rt3050.dtsi:112.4-28: Warning (gpios_property): /palmbus@10000000/gpio@600:ralink,num-gpios: cell 0 is not a phandle reference
../dts/rt3050.dtsi:112.4-28: Warning (gpios_property): /palmbus@10000000/gpio@600:ralink,num-gpios: Could not get phandle node for (cell 0)
../dts/rt3050.dtsi:132.4-28: Warning (gpios_property): /palmbus@10000000/gpio@638:ralink,num-gpios: cell 0 is not a phandle reference
../dts/rt3050.dtsi:132.4-28: Warning (gpios_property): /palmbus@10000000/gpio@638:ralink,num-gpios: Could not get phandle node for (cell 0)
../dts/rt3050.dtsi:148.4-28: Warning (gpios_property): /palmbus@10000000/gpio@660:ralink,num-gpios: cell 0 is not a phandle reference
../dts/rt3050.dtsi:140.19-154.5: Warning (gpios_property): /palmbus@10000000/gpio@660: Missing property '#gpio-cells' in node /flash@1f000000/partitions/partition@40000 or bad phandle (referred from ralink,num-gpios[0])
mipsel-openwrt-linux-musl-cpp -nostdinc -x assembler-with-cpp -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/arch/mips/boot/dts -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/arch/mips/boot/dts/include -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/include/ -undef -D__DTS__  -o /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt5350_wansview_ncs601w.dtb.tmp ../dts/rt5350_wansview_ncs601w.dts
rm -f /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt3052_unbranded_xdx-rn502j.dtb.tmp
mipsel-openwrt-linux-musl-cpp -nostdinc -x assembler-with-cpp -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/arch/mips/boot/dts -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/arch/mips/boot/dts/include -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/include/ -undef -D__DTS__  -o /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt5350_wiznet_wizfi630a.dtb.tmp ../dts/rt5350_wiznet_wizfi630a.dts
../dts/rt3050.dtsi:112.4-28: Warning (gpios_property): /palmbus@10000000/gpio@600:ralink,num-gpios: cell 0 is not a phandle reference
../dts/rt3050.dtsi:112.4-28: Warning (gpios_property): /palmbus@10000000/gpio@600:ralink,num-gpios: Could not get phandle node for (cell 0)
../dts/rt3050.dtsi:132.4-28: Warning (gpios_property): /palmbus@10000000/gpio@638:ralink,num-gpios: cell 0 is not a phandle reference
../dts/rt3050.dtsi:132.4-28: Warning (gpios_property): /palmbus@10000000/gpio@638:ralink,num-gpios: Could not get phandle node for (cell 0)
../dts/rt3050.dtsi:148.4-28: Warning (gpios_property): /palmbus@10000000/gpio@660:ralink,num-gpios: cell 0 is not a phandle reference
../dts/rt3050.dtsi:140.19-154.5: Warning (gpios_property): /palmbus@10000000/gpio@660: Missing property '#gpio-cells' in node /flash@1f000000/partitions/partition@40000 or bad phandle (referred from ralink,num-gpios[0])
/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/scripts/dtc/dtc -O dtb -i../dts/ -Wno-unit_address_vs_reg -Wno-simple_bus_reg -Wno-unit_address_format -Wno-pci_bridge -Wno-pci_device_bus_num -Wno-pci_device_reg -Wno-avoid_unnecessary_addr_size -Wno-alias_paths -Wno-graph_child_address -Wno-graph_port -Wno-unique_unit_address  -o /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt3052_upvel_ur-336un.dtb /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt3052_upvel_ur-336un.dtb.tmp
mipsel-openwrt-linux-musl-cpp -nostdinc -x assembler-with-cpp -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/arch/mips/boot/dts -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/arch/mips/boot/dts/include -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/include/ -undef -D__DTS__  -o /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt5350_zorlik_zl5900v2.dtb.tmp ../dts/rt5350_zorlik_zl5900v2.dts
rm -f /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt3052_upvel_ur-326n4g.dtb.tmp
/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/scripts/dtc/dtc -O dtb -i../dts/ -Wno-unit_address_vs_reg -Wno-simple_bus_reg -Wno-unit_address_format -Wno-pci_bridge -Wno-pci_device_bus_num -Wno-pci_device_reg -Wno-avoid_unnecessary_addr_size -Wno-alias_paths -Wno-graph_child_address -Wno-graph_port -Wno-unique_unit_address  -o /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt5350_vocore_vocore-16m.dtb /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt5350_vocore_vocore-16m.dtb.tmp
/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/scripts/dtc/dtc -O dtb -i../dts/ -Wno-unit_address_vs_reg -Wno-simple_bus_reg -Wno-unit_address_format -Wno-pci_bridge -Wno-pci_device_bus_num -Wno-pci_device_reg -Wno-avoid_unnecessary_addr_size -Wno-alias_paths -Wno-graph_child_address -Wno-graph_port -Wno-unique_unit_address  -o /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt5350_vocore_vocore-8m.dtb /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt5350_vocore_vocore-8m.dtb.tmp
../dts/rt3050.dtsi:112.4-28: Warning (gpios_property): /palmbus@10000000/gpio@600:ralink,num-gpios: cell 0 is not a phandle reference
../dts/rt3050.dtsi:112.4-28: Warning (gpios_property): /palmbus@10000000/gpio@600:ralink,num-gpios: Could not get phandle node for (cell 0)
../dts/rt3050.dtsi:132.4-28: Warning (gpios_property): /palmbus@10000000/gpio@638:ralink,num-gpios: cell 0 is not a phandle reference
mipsel-openwrt-linux-musl-cpp -nostdinc -x assembler-with-cpp -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/arch/mips/boot/dts -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/arch/mips/boot/dts/include -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/include/ -undef -D__DTS__  -o /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt3052_zyxel_keenetic.dtb.tmp ../dts/rt3052_zyxel_keenetic.dts
../dts/rt3050.dtsi:132.4-28: Warning (gpios_property): /palmbus@10000000/gpio@638:ralink,num-gpios: Could not get phandle node for (cell 0)
../dts/rt3050.dtsi:148.4-28: Warning (gpios_property): /palmbus@10000000/gpio@660:ralink,num-gpios: cell 0 is not a phandle reference
../dts/rt3050.dtsi:140.19-154.5: Warning (gpios_property): /palmbus@10000000/gpio@660: Missing property '#gpio-cells' in node /flash@1f000000/partitions/partition@40000 or bad phandle (referred from ralink,num-gpios[0])
rm -f /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt3052_upvel_ur-336un.dtb.tmp
mipsel-openwrt-linux-musl-cpp -nostdinc -x assembler-with-cpp -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/arch/mips/boot/dts -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/arch/mips/boot/dts/include -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/include/ -undef -D__DTS__  -o /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt5350_zyxel_keenetic-lite-b.dtb.tmp ../dts/rt5350_zyxel_keenetic-lite-b.dts
../dts/rt5350.dtsi:119.4-28: Warning (gpios_property): /palmbus@10000000/gpio@600:ralink,num-gpios: cell 0 is not a phandle reference
../dts/rt5350.dtsi:119.4-28: Warning (gpios_property): /palmbus@10000000/gpio@600:ralink,num-gpios: Could not get phandle node for (cell 0)
../dts/rt5350.dtsi:136.4-27: Warning (gpios_property): /palmbus@10000000/gpio@660:ralink,num-gpios: cell 0 is not a phandle reference
../dts/rt5350.dtsi:125.19-142.5: Warning (gpios_property): /palmbus@10000000/gpio@660: Missing property '#gpio-cells' in node /pinctrl/spi_pins or bad phandle (referred from ralink,num-gpios[0])
  also defined at ../dts/rt5350_vocore_vocore.dtsi:159.8-161.3
/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/scripts/dtc/dtc -O dtb -i../dts/ -Wno-unit_address_vs_reg -Wno-simple_bus_reg -Wno-unit_address_format -Wno-pci_bridge -Wno-pci_device_bus_num -Wno-pci_device_reg -Wno-avoid_unnecessary_addr_size -Wno-alias_paths -Wno-graph_child_address -Wno-graph_port -Wno-unique_unit_address  -o /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt5350_wansview_ncs601w.dtb /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt5350_wansview_ncs601w.dtb.tmp
../dts/rt5350.dtsi:119.4-28: Warning (gpios_property): /palmbus@10000000/gpio@600:ralink,num-gpios: cell 0 is not a phandle reference
../dts/rt5350.dtsi:119.4-28: Warning (gpios_property): /palmbus@10000000/gpio@600:ralink,num-gpios: Could not get phandle node for (cell 0)
../dts/rt5350.dtsi:136.4-27: Warning (gpios_property): /palmbus@10000000/gpio@660:ralink,num-gpios: cell 0 is not a phandle reference
../dts/rt5350.dtsi:125.19-142.5: Warning (gpios_property): /palmbus@10000000/gpio@660: Missing property '#gpio-cells' in node /pinctrl/spi_pins or bad phandle (referred from ralink,num-gpios[0])
  also defined at ../dts/rt5350_vocore_vocore.dtsi:159.8-161.3
rm -f /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt5350_vocore_vocore-8m.dtb.tmp
/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/scripts/dtc/dtc -O dtb -i../dts/ -Wno-unit_address_vs_reg -Wno-simple_bus_reg -Wno-unit_address_format -Wno-pci_bridge -Wno-pci_device_bus_num -Wno-pci_device_reg -Wno-avoid_unnecessary_addr_size -Wno-alias_paths -Wno-graph_child_address -Wno-graph_port -Wno-unique_unit_address  -o /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt5350_wiznet_wizfi630a.dtb /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt5350_wiznet_wizfi630a.dtb.tmp
rm -f /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt5350_vocore_vocore-16m.dtb.tmp
mipsel-openwrt-linux-musl-cpp -nostdinc -x assembler-with-cpp -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/arch/mips/boot/dts -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/arch/mips/boot/dts/include -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/include/ -undef -D__DTS__  -o /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt5350_zyxel_keenetic-start.dtb.tmp ../dts/rt5350_zyxel_keenetic-start.dts
../dts/rt5350.dtsi:119.4-28: Warning (gpios_property): /palmbus@10000000/gpio@600:ralink,num-gpios: cell 0 is not a phandle reference
../dts/rt5350.dtsi:119.4-28: Warning (gpios_property): /palmbus@10000000/gpio@600:ralink,num-gpios: Could not get phandle node for (cell 0)
../dts/rt5350.dtsi:136.4-27: Warning (gpios_property): /palmbus@10000000/gpio@660:ralink,num-gpios: cell 0 is not a phandle reference
../dts/rt5350.dtsi:125.19-142.5: Warning (gpios_property): /palmbus@10000000/gpio@660: Missing property '#gpio-cells' in node /pinctrl/spi_pins or bad phandle (referred from ralink,num-gpios[0])
rm -f /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt5350_wansview_ncs601w.dtb.tmp
../dts/rt5350.dtsi:119.4-28: Warning (gpios_property): /palmbus@10000000/gpio@600:ralink,num-gpios: cell 0 is not a phandle reference
../dts/rt5350.dtsi:119.4-28: Warning (gpios_property): /palmbus@10000000/gpio@600:ralink,num-gpios: Could not get phandle node for (cell 0)
../dts/rt5350.dtsi:136.4-27: Warning (gpios_property): /palmbus@10000000/gpio@660:ralink,num-gpios: cell 0 is not a phandle reference
../dts/rt5350.dtsi:125.19-142.5: Warning (gpios_property): /palmbus@10000000/gpio@660: Missing property '#gpio-cells' in node /palmbus@10000000/gdma@2800 or bad phandle (referred from ralink,num-gpios[0])
  also defined at ../dts/rt5350_wiznet_wizfi630a.dts:77.8-79.3
mipsel-openwrt-linux-musl-cpp -nostdinc -x assembler-with-cpp -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/arch/mips/boot/dts -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/arch/mips/boot/dts/include -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/include/ -undef -D__DTS__  -o /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt3052_zyxel_nbg-419n.dtb.tmp ../dts/rt3052_zyxel_nbg-419n.dts
/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/scripts/dtc/dtc -O dtb -i../dts/ -Wno-unit_address_vs_reg -Wno-simple_bus_reg -Wno-unit_address_format -Wno-pci_bridge -Wno-pci_device_bus_num -Wno-pci_device_reg -Wno-avoid_unnecessary_addr_size -Wno-alias_paths -Wno-graph_child_address -Wno-graph_port -Wno-unique_unit_address  -o /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt5350_zorlik_zl5900v2.dtb /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt5350_zorlik_zl5900v2.dtb.tmp
rm -f /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt5350_wiznet_wizfi630a.dtb.tmp
mipsel-openwrt-linux-musl-cpp -nostdinc -x assembler-with-cpp -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/arch/mips/boot/dts -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/arch/mips/boot/dts/include -I/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/include/ -undef -D__DTS__  -o /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt3352_zyxel_nbg-419n-v2.dtb.tmp ../dts/rt3352_zyxel_nbg-419n-v2.dts
../dts/rt5350.dtsi:119.4-28: Warning (gpios_property): /palmbus@10000000/gpio@600:ralink,num-gpios: cell 0 is not a phandle reference
../dts/rt5350.dtsi:119.4-28: Warning (gpios_property): /palmbus@10000000/gpio@600:ralink,num-gpios: Could not get phandle node for (cell 0)
../dts/rt5350.dtsi:136.4-27: Warning (gpios_property): /palmbus@10000000/gpio@660:ralink,num-gpios: cell 0 is not a phandle reference
../dts/rt5350.dtsi:125.19-142.5: Warning (gpios_property): /palmbus@10000000/gpio@660: Missing property '#gpio-cells' in node /pinctrl/spi_pins or bad phandle (referred from ralink,num-gpios[0])
rm -f /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt5350_zorlik_zl5900v2.dtb.tmp
/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/scripts/dtc/dtc -O dtb -i../dts/ -Wno-unit_address_vs_reg -Wno-simple_bus_reg -Wno-unit_address_format -Wno-pci_bridge -Wno-pci_device_bus_num -Wno-pci_device_reg -Wno-avoid_unnecessary_addr_size -Wno-alias_paths -Wno-graph_child_address -Wno-graph_port -Wno-unique_unit_address  -o /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt3052_zyxel_keenetic.dtb /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt3052_zyxel_keenetic.dtb.tmp
/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/scripts/dtc/dtc -O dtb -i../dts/ -Wno-unit_address_vs_reg -Wno-simple_bus_reg -Wno-unit_address_format -Wno-pci_bridge -Wno-pci_device_bus_num -Wno-pci_device_reg -Wno-avoid_unnecessary_addr_size -Wno-alias_paths -Wno-graph_child_address -Wno-graph_port -Wno-unique_unit_address  -o /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt3052_zyxel_nbg-419n.dtb /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt3052_zyxel_nbg-419n.dtb.tmp
/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/scripts/dtc/dtc -O dtb -i../dts/ -Wno-unit_address_vs_reg -Wno-simple_bus_reg -Wno-unit_address_format -Wno-pci_bridge -Wno-pci_device_bus_num -Wno-pci_device_reg -Wno-avoid_unnecessary_addr_size -Wno-alias_paths -Wno-graph_child_address -Wno-graph_port -Wno-unique_unit_address  -o /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt5350_zyxel_keenetic-lite-b.dtb /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt5350_zyxel_keenetic-lite-b.dtb.tmp
/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/scripts/dtc/dtc -O dtb -i../dts/ -Wno-unit_address_vs_reg -Wno-simple_bus_reg -Wno-unit_address_format -Wno-pci_bridge -Wno-pci_device_bus_num -Wno-pci_device_reg -Wno-avoid_unnecessary_addr_size -Wno-alias_paths -Wno-graph_child_address -Wno-graph_port -Wno-unique_unit_address  -o /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt5350_zyxel_keenetic-start.dtb /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt5350_zyxel_keenetic-start.dtb.tmp
../dts/rt3050.dtsi:112.4-28: Warning (gpios_property): /palmbus@10000000/gpio@600:ralink,num-gpios: cell 0 is not a phandle reference
../dts/rt3050.dtsi:112.4-28: Warning (gpios_property): /palmbus@10000000/gpio@600:ralink,num-gpios: Could not get phandle node for (cell 0)
../dts/rt3050.dtsi:132.4-28: Warning (gpios_property): /palmbus@10000000/gpio@638:ralink,num-gpios: cell 0 is not a phandle reference
../dts/rt3050.dtsi:132.4-28: Warning (gpios_property): /palmbus@10000000/gpio@638:ralink,num-gpios: Could not get phandle node for (cell 0)
../dts/rt3050.dtsi:148.4-28: Warning (gpios_property): /palmbus@10000000/gpio@660:ralink,num-gpios: cell 0 is not a phandle reference
../dts/rt3050.dtsi:140.19-154.5: Warning (gpios_property): /palmbus@10000000/gpio@660: Missing property '#gpio-cells' in node /flash@1f000000/partitions/partition@40000 or bad phandle (referred from ralink,num-gpios[0])
../dts/rt3050.dtsi:112.4-28: Warning (gpios_property): /palmbus@10000000/gpio@600:ralink,num-gpios: cell 0 is not a phandle reference
../dts/rt3050.dtsi:112.4-28: Warning (gpios_property): /palmbus@10000000/gpio@600:ralink,num-gpios: Could not get phandle node for (cell 0)
../dts/rt3050.dtsi:132.4-28: Warning (gpios_property): /palmbus@10000000/gpio@638:ralink,num-gpios: cell 0 is not a phandle reference
../dts/rt3050.dtsi:132.4-28: Warning (gpios_property): /palmbus@10000000/gpio@638:ralink,num-gpios: Could not get phandle node for (cell 0)
../dts/rt3050.dtsi:148.4-28: Warning (gpios_property): /palmbus@10000000/gpio@660:ralink,num-gpios: cell 0 is not a phandle reference
../dts/rt3050.dtsi:140.19-154.5: Warning (gpios_property): /palmbus@10000000/gpio@660: Missing property '#gpio-cells' in node /flash@1f000000/partitions/partition@40000 or bad phandle (referred from ralink,num-gpios[0])
rm -f /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt3052_zyxel_keenetic.dtb.tmp
rm -f /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt3052_zyxel_nbg-419n.dtb.tmp
/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/linux-5.4.52/scripts/dtc/dtc -O dtb -i../dts/ -Wno-unit_address_vs_reg -Wno-simple_bus_reg -Wno-unit_address_format -Wno-pci_bridge -Wno-pci_device_bus_num -Wno-pci_device_reg -Wno-avoid_unnecessary_addr_size -Wno-alias_paths -Wno-graph_child_address -Wno-graph_port -Wno-unique_unit_address  -o /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt3352_zyxel_nbg-419n-v2.dtb /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt3352_zyxel_nbg-419n-v2.dtb.tmp
../dts/rt5350.dtsi:119.4-28: Warning (gpios_property): /palmbus@10000000/gpio@600:ralink,num-gpios: cell 0 is not a phandle reference
../dts/rt5350.dtsi:119.4-28: Warning (gpios_property): /palmbus@10000000/gpio@600:ralink,num-gpios: Could not get phandle node for (cell 0)
../dts/rt5350.dtsi:136.4-27: Warning (gpios_property): /palmbus@10000000/gpio@660:ralink,num-gpios: cell 0 is not a phandle reference
../dts/rt5350.dtsi:125.19-142.5: Warning (gpios_property): /palmbus@10000000/gpio@660: Missing property '#gpio-cells' in node /pinctrl/spi_pins or bad phandle (referred from ralink,num-gpios[0])
../dts/rt5350.dtsi:119.4-28: Warning (gpios_property): /palmbus@10000000/gpio@600:ralink,num-gpios: cell 0 is not a phandle reference
../dts/rt5350.dtsi:119.4-28: Warning (gpios_property): /palmbus@10000000/gpio@600:ralink,num-gpios: Could not get phandle node for (cell 0)
../dts/rt5350.dtsi:136.4-27: Warning (gpios_property): /palmbus@10000000/gpio@660:ralink,num-gpios: cell 0 is not a phandle reference
../dts/rt5350.dtsi:125.19-142.5: Warning (gpios_property): /palmbus@10000000/gpio@660: Missing property '#gpio-cells' in node /pinctrl/spi_pins or bad phandle (referred from ralink,num-gpios[0])
rm -f /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt5350_zyxel_keenetic-lite-b.dtb.tmp
rm -f /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt5350_zyxel_keenetic-start.dtb.tmp
../dts/rt3352.dtsi:110.4-28: Warning (gpios_property): /palmbus@10000000/gpio@600:ralink,num-gpios: cell 0 is not a phandle reference
../dts/rt3352.dtsi:110.4-28: Warning (gpios_property): /palmbus@10000000/gpio@600:ralink,num-gpios: Could not get phandle node for (cell 0)
../dts/rt3352.dtsi:129.4-28: Warning (gpios_property): /palmbus@10000000/gpio@638:ralink,num-gpios: cell 0 is not a phandle reference
../dts/rt3352.dtsi:121.19-135.5: Warning (gpios_property): /palmbus@10000000/gpio@638: Missing property '#gpio-cells' in node /ohci@101c1000/port@1 or bad phandle (referred from ralink,num-gpios[0])
../dts/rt3352.dtsi:145.4-27: Warning (gpios_property): /palmbus@10000000/gpio@660:ralink,num-gpios: cell 0 is not a phandle reference
../dts/rt3352.dtsi:137.19-151.5: Warning (gpios_property): /palmbus@10000000/gpio@660: Missing property '#gpio-cells' in node /pinctrl/spi_pins or bad phandle (referred from ralink,num-gpios[0])
rm -f /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt3352_zyxel_nbg-419n-v2.dtb.tmp
mkdir -p /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/bin/targets/ramips/rt305x /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/tmp
rm -rf /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/json_info_files
/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/staging_dir/host/bin/mksquashfs4 /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/root-ramips /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/root.squashfs -nopad -noappend -root-owned -comp xz -Xpreset 9 -Xe -Xlc 0 -Xlp 2 -Xpb 2  -b 1024k -p '/dev d 755 0 0' -p '/dev/console c 600 0 0 5 1' -processors 1
rm -f /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/tmp/openwrt-ramips-rt305x-buffalo_whr-g300n-initramfs-kernel.bin
rm -f /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/buffalo_whr-g300n-kernel.bin
cp /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/vmlinux-initramfs /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/tmp/openwrt-ramips-rt305x-buffalo_whr-g300n-initramfs-kernel.bin
cp /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/vmlinux /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/buffalo_whr-g300n-kernel.bin
Pseudo file "/dev" exists in source filesystem "/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/root-ramips/dev".
Ignoring, exclude it (-e/-ef) to override.
cat /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt3052_buffalo_whr-g300n.dtb >> /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/tmp/openwrt-ramips-rt305x-buffalo_whr-g300n-initramfs-kernel.bin
cat /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/image-rt3052_buffalo_whr-g300n.dtb >> /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/buffalo_whr-g300n-kernel.bin
/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/staging_dir/host/bin/lzma e /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/buffalo_whr-g300n-kernel.bin -lc1 -lp2 -pb2  /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/buffalo_whr-g300n-kernel.bin.new
/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/staging_dir/host/bin/lzma e /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/tmp/openwrt-ramips-rt305x-buffalo_whr-g300n-initramfs-kernel.bin -lc1 -lp2 -pb2  /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/tmp/openwrt-ramips-rt305x-buffalo_whr-g300n-initramfs-kernel.bin.new
Parallel mksquashfs: Using 1 processor
Creating 4.0 filesystem on /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/root.squashfs, block size 1048576.

[===============================================================/] 864/864 100%

Exportable Squashfs 4.0 filesystem, xz compressed, data block size 1048576
	compressed data, compressed metadata, compressed fragments,
	no xattrs, compressed ids
	duplicates are removed
Filesystem size 1683.23 Kbytes (1.64 Mbytes)
	33.02% of uncompressed filesystem size (5098.30 Kbytes)
Inode table size 7794 bytes (7.61 Kbytes)
	20.24% of uncompressed inode table size (38516 bytes)
Directory table size 11200 bytes (10.94 Kbytes)
	45.52% of uncompressed directory table size (24604 bytes)
Number of duplicate files found 123
Number of inodes 1167
Number of files 872
Number of fragments 6
Number of symbolic links  188
Number of device nodes 1
Number of fifo nodes 0
Number of socket nodes 0
Number of directories 106
Number of ids (unique uids + gids) 1
Number of uids 1
	root (0)
Number of gids 1
	root (0)
mkimage -A mips -O linux -T kernel -C lzma -a 0x80000000 -e 0x80000000 -n 'MIPS OpenWrt Linux-5.4.52' -d /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/buffalo_whr-g300n-kernel.bin /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/buffalo_whr-g300n-kernel.bin.new
Image Name:   MIPS OpenWrt Linux-5.4.52
Created:      Fri Aug  7 04:29:52 2020
Image Type:   MIPS Linux Kernel Image (lzma compressed)
Data Size:    1401210 Bytes = 1368.37 KiB = 1.34 MiB
Load Address: 80000000
Entry Point:  80000000
mv /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/buffalo_whr-g300n-kernel.bin.new /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/buffalo_whr-g300n-kernel.bin
[ -f /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/buffalo_whr-g300n-kernel.bin -a -f /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/root.squashfs ]
[ -f /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/buffalo_whr-g300n-kernel.bin -a -f /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/root.squashfs ]
dd if=/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/buffalo_whr-g300n-kernel.bin >> /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/tmp/openwrt-ramips-rt305x-buffalo_whr-g300n-squashfs-sysupgrade.bin
dd if=/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/buffalo_whr-g300n-kernel.bin >> /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/tmp/openwrt-ramips-rt305x-buffalo_whr-g300n-squashfs-tftp.bin
2736+1 records in
2736+1 records out
1401274 bytes (1.4 MB, 1.3 MiB) copied, 0.00407461 s, 344 MB/s
dd if=/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/root.squashfs >> /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/tmp/openwrt-ramips-rt305x-buffalo_whr-g300n-squashfs-sysupgrade.bin
2736+1 records in
2736+1 records out
1401274 bytes (1.4 MB, 1.3 MiB) copied, 0.00698168 s, 201 MB/s
dd if=/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/root.squashfs >> /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/tmp/openwrt-ramips-rt305x-buffalo_whr-g300n-squashfs-tftp.bin
3366+1 records in
3366+1 records out
1723632 bytes (1.7 MB, 1.6 MiB) copied, 0.00624101 s, 276 MB/s
/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/staging_dir/host/bin/padjffs2 /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/tmp/openwrt-ramips-rt305x-buffalo_whr-g300n-squashfs-sysupgrade.bin  64
padding image to 00300000
echo '{  "metadata_version": "1.1", "compat_version": "1.0",    "supported_devices":["buffalo,whr-g300n","whr-g300n"], "version": { "dist": "OpenWrt", "version": "SNAPSHOT", "revision": "r0+14078-b3a75b4e7d", "target": "ramips/rt305x", "board": "buffalo_whr-g300n" } }' | fwtool -I - /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/tmp/openwrt-ramips-rt305x-buffalo_whr-g300n-squashfs-sysupgrade.bin
3366+1 records in
3366+1 records out
1723632 bytes (1.7 MB, 1.6 MiB) copied, 0.00617951 s, 279 MB/s
/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/staging_dir/host/bin/padjffs2 /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/tmp/openwrt-ramips-rt305x-buffalo_whr-g300n-squashfs-tftp.bin  64
padding image to 00300000
( echo -n -e "# Airstation FirmWare\nrun u_fw\nreset\n\n" | dd bs=512 count=1 conv=sync; dd if=/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/tmp/openwrt-ramips-rt305x-buffalo_whr-g300n-squashfs-tftp.bin; ) > /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/tmp/openwrt-ramips-rt305x-buffalo_whr-g300n-squashfs-tftp.bin.tmp && /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/staging_dir/host/bin/buffalo-tftp -i /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/tmp/openwrt-ramips-rt305x-buffalo_whr-g300n-squashfs-tftp.bin.tmp -o /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/tmp/openwrt-ramips-rt305x-buffalo_whr-g300n-squashfs-tftp.bin.new
0+1 records in
1+0 records out
512 bytes copied, 7.7097e-05 s, 6.6 MB/s
[ ! -s "/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/key-build" -o ! -s "/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/key-build.ucert" -o ! -s "/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/tmp/openwrt-ramips-rt305x-buffalo_whr-g300n-squashfs-sysupgrade.bin" ] || { cp "/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/key-build.ucert" "/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/tmp/openwrt-ramips-rt305x-buffalo_whr-g300n-squashfs-sysupgrade.bin.ucert" ; usign -S -m "/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/tmp/openwrt-ramips-rt305x-buffalo_whr-g300n-squashfs-sysupgrade.bin" -s "/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/key-build" -x "/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/tmp/openwrt-ramips-rt305x-buffalo_whr-g300n-squashfs-sysupgrade.bin.sig" ; ucert -A -c "/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/tmp/openwrt-ramips-rt305x-buffalo_whr-g300n-squashfs-sysupgrade.bin.ucert" -x "/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/tmp/openwrt-ramips-rt305x-buffalo_whr-g300n-squashfs-sysupgrade.bin.sig" ; fwtool -S "/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/tmp/openwrt-ramips-rt305x-buffalo_whr-g300n-squashfs-sysupgrade.bin.ucert" "/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/tmp/openwrt-ramips-rt305x-buffalo_whr-g300n-squashfs-sysupgrade.bin" ; }
6144+1 records in
6144+1 records out
3145732 bytes (3.1 MB, 3.0 MiB) copied, 0.008695 s, 362 MB/s
mv /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/tmp/openwrt-ramips-rt305x-buffalo_whr-g300n-squashfs-tftp.bin.new /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/tmp/openwrt-ramips-rt305x-buffalo_whr-g300n-squashfs-tftp.bin
cp /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/tmp/openwrt-ramips-rt305x-buffalo_whr-g300n-squashfs-tftp.bin /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/bin/targets/ramips/rt305x/openwrt-ramips-rt305x-buffalo_whr-g300n-squashfs-tftp.bin
cp /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/tmp/openwrt-ramips-rt305x-buffalo_whr-g300n-squashfs-sysupgrade.bin /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/bin/targets/ramips/rt305x/openwrt-ramips-rt305x-buffalo_whr-g300n-squashfs-sysupgrade.bin
mkimage -A mips -O linux -T kernel -C lzma -a 0x80000000 -e 0x80000000 -n 'MIPS OpenWrt Linux-5.4.52' -d /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/tmp/openwrt-ramips-rt305x-buffalo_whr-g300n-initramfs-kernel.bin /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/tmp/openwrt-ramips-rt305x-buffalo_whr-g300n-initramfs-kernel.bin.new
Image Name:   MIPS OpenWrt Linux-5.4.52
Created:      Fri Aug  7 04:29:52 2020
Image Type:   MIPS Linux Kernel Image (lzma compressed)
Data Size:    3098496 Bytes = 3025.88 KiB = 2.95 MiB
Load Address: 80000000
Entry Point:  80000000
mv /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/tmp/openwrt-ramips-rt305x-buffalo_whr-g300n-initramfs-kernel.bin.new /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/tmp/openwrt-ramips-rt305x-buffalo_whr-g300n-initramfs-kernel.bin
cp /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/linux-ramips_rt305x/tmp/openwrt-ramips-rt305x-buffalo_whr-g300n-initramfs-kernel.bin /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/bin/targets/ramips/rt305x/openwrt-ramips-rt305x-buffalo_whr-g300n-initramfs-kernel.bin
IPKG_NO_SCRIPT=1 IPKG_INSTROOT=/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/root.orig-ramips TMPDIR=/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/root.orig-ramips/tmp /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/staging_dir/host/bin/opkg --offline-root /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/build_dir/target-mipsel_24kc_musl/root.orig-ramips --force-postinstall --add-dest root:/ --add-arch all:100 --add-arch mipsel_24kc:200 list-installed > /openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/bin/targets/ramips/rt305x/openwrt-ramips-rt305x-buffalo_whr-g300n.manifest
make[5]: Leaving directory '/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/target/linux/ramips/image'
make[4]: Leaving directory '/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/target/linux/ramips'
make[3]: Leaving directory '/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N/target/linux'
time: target/linux/install#510.79#45.88#80.41
make[2]: Leaving directory '/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N'
export MAKEFLAGS= ;make -w -r package/index
make[2]: Entering directory '/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N'
Generating package index...
Generating index for package ./base-files_225-r0+14078-b3a75b4e7d_mipsel_24kc.ipk
Generating index for package ./fstools_2020-06-17-d34ea8eb-1_mipsel_24kc.ipk
Generating index for package ./fwtool_2019-11-12-8f7fe925-1_mipsel_24kc.ipk
Generating index for package ./ip6tables_1.8.4-1_mipsel_24kc.ipk
Generating index for package ./iptables-mod-conntrack-extra_1.8.4-1_mipsel_24kc.ipk
Generating index for package ./iptables_1.8.4-1_mipsel_24kc.ipk
Generating index for package ./kmod-gpio-button-hotplug_5.4.52-3_mipsel_24kc.ipk
Generating index for package ./kmod-ip6-tunnel_5.4.52-1_mipsel_24kc.ipk
Generating index for package ./kmod-ip6tables_5.4.52-1_mipsel_24kc.ipk
Generating index for package ./kmod-ipt-conntrack-extra_5.4.52-1_mipsel_24kc.ipk
Generating index for package ./kmod-ipt-conntrack_5.4.52-1_mipsel_24kc.ipk
Generating index for package ./kmod-ipt-core_5.4.52-1_mipsel_24kc.ipk
Generating index for package ./kmod-ipt-nat_5.4.52-1_mipsel_24kc.ipk
Generating index for package ./kmod-ipt-offload_5.4.52-1_mipsel_24kc.ipk
Generating index for package ./kmod-ipt-raw_5.4.52-1_mipsel_24kc.ipk
Generating index for package ./kmod-iptunnel6_5.4.52-1_mipsel_24kc.ipk
Generating index for package ./kmod-leds-gpio_5.4.52-1_mipsel_24kc.ipk
Generating index for package ./kmod-ledtrig-default-on_5.4.52-1_mipsel_24kc.ipk
Generating index for package ./kmod-ledtrig-heartbeat_5.4.52-1_mipsel_24kc.ipk
Generating index for package ./kmod-ledtrig-netdev_5.4.52-1_mipsel_24kc.ipk
Generating index for package ./kmod-ledtrig-timer_5.4.52-1_mipsel_24kc.ipk
Generating index for package ./kmod-lib-crc-ccitt_5.4.52-1_mipsel_24kc.ipk
Generating index for package ./kmod-nat46_5.4.52+2020-07-16-ac712ad2-1_mipsel_24kc.ipk
Generating index for package ./kmod-nf-conntrack6_5.4.52-1_mipsel_24kc.ipk
Generating index for package ./kmod-nf-conntrack_5.4.52-1_mipsel_24kc.ipk
Generating index for package ./kmod-nf-flow_5.4.52-1_mipsel_24kc.ipk
Generating index for package ./kmod-nf-ipt6_5.4.52-1_mipsel_24kc.ipk
Generating index for package ./kmod-nf-ipt_5.4.52-1_mipsel_24kc.ipk
Generating index for package ./kmod-nf-nat_5.4.52-1_mipsel_24kc.ipk
Generating index for package ./kmod-nf-reject6_5.4.52-1_mipsel_24kc.ipk
Generating index for package ./kmod-nf-reject_5.4.52-1_mipsel_24kc.ipk
Generating index for package ./kmod-ppp_5.4.52-1_mipsel_24kc.ipk
Generating index for package ./kmod-pppoe_5.4.52-1_mipsel_24kc.ipk
Generating index for package ./kmod-pppox_5.4.52-1_mipsel_24kc.ipk
Generating index for package ./kmod-slhc_5.4.52-1_mipsel_24kc.ipk
Generating index for package ./libgcc1_8.4.0-2_mipsel_24kc.ipk
Generating index for package ./libip4tc2_1.8.4-1_mipsel_24kc.ipk
Generating index for package ./libip6tc2_1.8.4-1_mipsel_24kc.ipk
Generating index for package ./libiwinfo-lua_2020-06-03-2faa20e5-1_mipsel_24kc.ipk
Generating index for package ./libiwinfo20200105_2020-06-03-2faa20e5-1_mipsel_24kc.ipk
Generating index for package ./libpthread_1.1.24-2_mipsel_24kc.ipk
Generating index for package ./libxtables12_1.8.4-1_mipsel_24kc.ipk
Generating index for package ./mtd_25_mipsel_24kc.ipk
Generating index for package ./busybox_1.31.1-1_mipsel_24kc.ipk
Generating index for package ./dnsmasq_2.82-3_mipsel_24kc.ipk
Generating index for package ./dropbear_2020.80-1_mipsel_24kc.ipk
Generating index for package ./ds-lite_8_all.ipk
Generating index for package ./firewall_2020-07-25-e9b90dfa-1_mipsel_24kc.ipk
Generating index for package ./getrandom_2019-12-31-0e34af14-4_mipsel_24kc.ipk
Generating index for package ./jshn_2020-08-06-9e52171d-1_mipsel_24kc.ipk
Generating index for package ./jsonfilter_2018-02-04-c7e938d6-1_mipsel_24kc.ipk
Generating index for package ./libblobmsg-json_2020-08-06-9e52171d-1_mipsel_24kc.ipk
Generating index for package ./libjson-c5_0.14-1_mipsel_24kc.ipk
Generating index for package ./libjson-script_2020-08-06-9e52171d-1_mipsel_24kc.ipk
Generating index for package ./liblua5.1.5_5.1.5-7_mipsel_24kc.ipk
Generating index for package ./libnl-tiny_2019-10-29-0219008c-1_mipsel_24kc.ipk
Generating index for package ./libubox20191228_2020-08-06-9e52171d-1_mipsel_24kc.ipk
Generating index for package ./libubus-lua_2020-02-05-171469e3-1_mipsel_24kc.ipk
Generating index for package ./libubus20191227_2020-02-05-171469e3-1_mipsel_24kc.ipk
Generating index for package ./libuci20130104_2020-04-24-ec8d3233-3_mipsel_24kc.ipk
Generating index for package ./libuclient20160123_2020-06-17-c6609861-1_mipsel_24kc.ipk
Generating index for package ./logd_2019-12-31-0e34af14-4_mipsel_24kc.ipk
Generating index for package ./lua_5.1.5-7_mipsel_24kc.ipk
Generating index for package ./map_5_mipsel_24kc.ipk
Generating index for package ./netifd_2020-06-06-51e9fb81-1_mipsel_24kc.ipk
Generating index for package ./odhcp6c_2020-03-28-f575351c-16_mipsel_24kc.ipk
Generating index for package ./odhcpd-ipv6only_2020-06-21-5da52992-4_mipsel_24kc.ipk
Generating index for package ./openwrt-keyring_2019-07-25-8080ef34-1_mipsel_24kc.ipk
Generating index for package ./opkg_2020-05-07-f2166a89-1_mipsel_24kc.ipk
Generating index for package ./ppp-mod-pppoe_2.4.8.git-2020-05-25-2_mipsel_24kc.ipk
Generating index for package ./ppp_2.4.8.git-2020-05-25-2_mipsel_24kc.ipk
Generating index for package ./procd_2020-08-06-ab55357d-1_mipsel_24kc.ipk
Generating index for package ./resolveip_2_mipsel_24kc.ipk
Generating index for package ./rpcd-mod-file_2020-05-26-078bb57e-1_mipsel_24kc.ipk
Generating index for package ./rpcd-mod-iwinfo_2020-05-26-078bb57e-1_mipsel_24kc.ipk
Generating index for package ./rpcd_2020-05-26-078bb57e-1_mipsel_24kc.ipk
Generating index for package ./swconfig_12_mipsel_24kc.ipk
Generating index for package ./ubox_2019-12-31-0e34af14-4_mipsel_24kc.ipk
Generating index for package ./ubus_2020-02-05-171469e3-1_mipsel_24kc.ipk
Generating index for package ./ubusd_2020-02-05-171469e3-1_mipsel_24kc.ipk
Generating index for package ./uci_2020-04-24-ec8d3233-3_mipsel_24kc.ipk
Generating index for package ./uclient-fetch_2020-06-17-c6609861-1_mipsel_24kc.ipk
Generating index for package ./uhttpd-mod-ubus_2020-08-05-212f8364-1_mipsel_24kc.ipk
Generating index for package ./uhttpd_2020-08-05-212f8364-1_mipsel_24kc.ipk
Generating index for package ./urandom-seed_2_mipsel_24kc.ipk
Generating index for package ./urngd_2020-01-21-c7f7b6b6-1_mipsel_24kc.ipk
Generating index for package ./usign_2020-05-23-f1f65026-1_mipsel_24kc.ipk
Generating index for package ./liblucihttp-lua_2019-07-05-a34a17d5-1_mipsel_24kc.ipk
Generating index for package ./liblucihttp0_2019-07-05-a34a17d5-1_mipsel_24kc.ipk
Generating index for package ./luci-app-firewall_git-20.220.15511-b8a74cb_all.ipk
Generating index for package ./luci-app-opkg_git-20.220.15511-b8a74cb_all.ipk
Generating index for package ./luci-base_git-20.220.15511-b8a74cb_mipsel_24kc.ipk
Generating index for package ./luci-i18n-base-ja_git-20.220.15511-b8a74cb_all.ipk
Generating index for package ./luci-i18n-firewall-ja_git-20.220.15511-b8a74cb_all.ipk
Generating index for package ./luci-i18n-opkg-ja_git-20.220.15511-b8a74cb_all.ipk
Generating index for package ./luci-lib-base_git-20.220.15511-b8a74cb_all.ipk
Generating index for package ./luci-lib-ip_git-20.220.15511-b8a74cb_mipsel_24kc.ipk
Generating index for package ./luci-lib-jsonc_git-20.220.15511-b8a74cb_mipsel_24kc.ipk
Generating index for package ./luci-lib-nixio_git-20.220.15511-b8a74cb_mipsel_24kc.ipk
Generating index for package ./luci-mod-admin-full_git-20.220.15511-b8a74cb_all.ipk
Generating index for package ./luci-mod-network_git-20.220.15511-b8a74cb_all.ipk
Generating index for package ./luci-mod-status_git-20.220.15511-b8a74cb_mipsel_24kc.ipk
Generating index for package ./luci-mod-system_git-20.220.15511-b8a74cb_all.ipk
Generating index for package ./luci-proto-ipv6_git-20.220.15511-b8a74cb_all.ipk
Generating index for package ./luci-proto-ppp_git-20.220.15511-b8a74cb_all.ipk
Generating index for package ./luci-theme-bootstrap_git-20.220.15511-b8a74cb_all.ipk
Generating index for package ./luci_git-20.220.15511-b8a74cb_all.ipk
Generating index for package ./rpcd-mod-luci_20191114_mipsel_24kc.ipk
Generating index for package ./rpcd-mod-rrdns_20170710_mipsel_24kc.ipk
Generating index for package ./cgi-io_19_mipsel_24kc.ipk
Signing package index...
make[2]: Leaving directory '/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N'
export MAKEFLAGS= ;make -w -r json_overview_image_info
make[2]: Entering directory '/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N'
make[2]: Nothing to be done for 'json_overview_image_info'.
make[2]: Leaving directory '/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N'
export MAKEFLAGS= ;make -w -r checksum
make[2]: Entering directory '/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N'
make[2]: Leaving directory '/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N'
make[1]: Leaving directory '/openwrt_ssd/jenkins/workspace/OpenWrt-master-BUFFALO-WHR-G300N'
+ RESULT_MSG=成功しました。
+ EXIT_CODE=0
+ toot post 【ビルド通知】OpenWrt-master-BUFFALO-WHR-G300N プロジェクトの #355 ビルドが成功しました。 https://taiha.net/jenkins/job/OpenWrt-master-BUFFALO-WHR-G300N/355/ #TaihaBuild -v unlisted
Toot posted: https://mstdn.maud.io/@musashino205/104646813289466024
+ exit 0
成果物を保存中
Finished: SUCCESS